DVD O P E R AT I O N S
Audio Options
Note
Digital Output
-PCM: Converts to PCM(2CH) audio.
-Bitstream: Outputs Dolby Digital via the digital output. Select Bitstream when connecting to a Dolby Digital Decoder.
PCM Down Sampling | : On |
There is no analog audio output when you set DTS to on.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DTS
Select On when connecting to a DTS Decoder.
PCM Down Sampling | : On |
-Off: Doesn’t output a digital signal.
- On: Outputs DTS Bitstream via digital output.
Dynamic Compression - On: When the movie-
soundtracks are played at |
|
| On | |
|
| On |
| |
low volume or from smaller | PCM Down Sampling | : Onff | ||
|
|
|
| |
speakers, the system can |
|
|
|
|
apply appropriate compression |
|
|
|
|
to make |
|
|
|
|
|
|
|
| |
intelligible and prevent dramatic |
|
|
|
|
passages from getting too loud. |
|
|
|
|
-Off: To select the standard range.
PCM Down Sampling
- On: Select this when the Amplifier connected to the
player is not 96KHz | PCM Down Sampling | : On |
| |
|
|
| ||
compatible. In this case, the |
|
| ||
96KHz signals will be |
|
|
|
|
converted down to 48KHZ. |
|
|
|
|
|
|
|
|
-Off: Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.
Note
There is no analog audio output when you set DTS to on.
▼ - Dynamic compression restrains the dynamic range of the sound, i.e. the difference between the loud and quiet passages of a DVD audio track. This is useful when watching a DVD late at night.
Note
Even when PCM Down sampling is Off, some discs will only output down sampled audio through the digital outputs.