Basic VCR Operation
To play a standard VHS videotape, just insert it into the VCR deck and press the PLAY button. You can turn on the Auto Play to enable the VCR deck to play automatically when you insert a videotape that is missing the Record Safety Tab. See page 29.
1Insert VHS Tape
Insert a standard VHS videotape into the VCR deck.
•When a videotape is inserted, power will turn on automatically.
2Play Tape
Press the ❿ll(PLAY/PAUSE) button on the remote control or on the front panel of the unit. The videotape will begin to play automatically if it is missing the Record Safety Tab and Auto Play is turned on. See page 28.
3Stop Playback
Press the ■ (STOP) button on the remote control or on the front panel of the unit.
4Additional VCR Options
•See pages 28~29 for special VCR Playback features.
•See pages 31~32 for VCR Recording features.
•See page 33 for Timer Recording features.
Basic TV Tuner Operations
When watching TV using the
1TV/VCR
Press this button to switch between your TV’s tuner and the VCR’s internal tuner.
•You don’t need to press the TV/VCR button in vcr mode.
2Channel UP/DOWN
Use these buttons to move to the previous or the next channel.
3
Use these buttons to select the desired channel directly.
4100 + Buttons
Press this button tune to channels 100 and above. First, press the 100+ button, then use the numeric
•This button is activated only in Cable TV Mode.
5INFO. Button
Press this button to display the current channel.
•This also works in DVD and VCR mode.
On-Screen Menu Navigation
The
Language | : English |
Front Display | : Auto |
Auto Power Off | : Off |
1MENU Button
Press this button while the DVD is in Stop or Play mode to open the
2UP/DOWN and LEFT/RIGHT
Use these buttons to move the selection bar UP/DOWN and LEFT/RIGHT to cycle through the menu options.
3ENTER Button
Press this button to confirm any new settings.
4RETURN Button
Press this button to return to the last MENU screen displayed or to exit the