Samsung DVD-V9090 instruction manual Tuner Band Setting, RF Output Channel

Tuner Band Setting RF Output Channel

This feature allows you to manually set the DVD-VCR’s tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup.

•Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.

1Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

2Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP” then press ENTER to select.

3Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel”, then press ENTER to select.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

4Select “Ant./Cable”

Move the selection arrow to “Ant./Cable” then press RIGHT button to select from the following options:

•Antenna - Indicates that the DVD-VCR is connected to an indoor or outdoor VHF/UHF antenna.

•Cable TV - Indicates that the DVD-VCR is connected to Cable TV.

Ant./Cable	: Antenna	Cable TV
RF Output CH	: 3CH	Antenna
Auto Channel Memory
Channel Add/Delete

1Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

2Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “Setup” then press ENTER to select.

3Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel,” then press ENTER to select.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

4Select “RF Output CH”

Move the selection bar to “RF Output CH”, then press right to change.

Ant./Cable	: Antenna	3CH
RF Output CH	: 4CH
		4CH
Auto Channel Memory

Channel Add/Delete

5Change “RF Output CH”

A message will appear on your TV. Then press ENTER to change.

6Change “TV Channel”

A message will appear on your TV. When the message disappears, change your TV to channel 3 or 4 to match the RF output channel of the player.

ENG-13