DTS | Dynamic Compression |
If your A/V receiver is equipped with a DTS decoder, your
NOTE: Select “On” ONLY if you have connected a
1Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2Select “DVD”
Use the UP/DOWN buttons to highlight “DVD” then press the ENTER button.
3Select “Audio”
Highlight “Audio”, then press the ENTER button.
4Set “DTS”
Highlight “DTS” then press the RIGHT button to select one of the following options:
•Off – To use your DVD/TV with an A/V receiver NOT equipped with a DTS decoder.
•On – To use your DVD/TV with an A/V receiver equipped with a DTS decoder
Off
On
PCM Down Sampling | : On |
Dynamic Compression restrains the dynamic range of sounds, i.e. the difference between the loud and quiet passages of a DVD audio track.
1Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2Select “DVD”
Use the UP/DOWN buttons to highlight “DVD” then press the ENTER button.
3Select “Audio”
Highlight “Audio”, then press the ENTER button.
4Set “Dynamic Compression”
Highlight “Dynamic Compression”, then press the RIGHT button to select one of the following options:
•On – This will compress the total dynamic range of the DVD audio, making quiet passages in the audio signal louder and loud passages softer.
•Off – This will preserve the original dynamic range.
| On | On | |
| On | ||
| Off | ||
PCM Down Sampling | : Offn | ||
|