Activate OTR, Set Record Speed, Select Program

One-Touch Recording (OTR)

Record Speed

How to Set a Timer Recording

Function (VCR)

One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the touch of a button.

1Start Recording

Follow the instructions on page 30 to begin recording.

2Activate OTR

While in Record mode, press the (REC) button again to activate One-Touch Recording (OTR).

•Record length 0:30 appears on the On-Screen Display and the DVD-VCR will record for exactly 30 minutes.

Record

3 Add Recording Time

Continue pressing (REC) to add recording time in 30 minute increments up to 4 hours.

•The DVD-VCR stops recording automatically when the time has elapsed. And DVD-VCR will be Automatically turned off when the OTR finished.

Record	length	0:30	07	0:30
				1:00
				1:30
				4:30
	SP

You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T-120 tape.

1Start Recording

Follow the Basic Recording instructions on page 30.

2Set Record Speed

Press the SPEED button on the remote control to set the Record Speed to one of the following options:

•SP – Standard Play, for best quality.

•SLP – Super Long Play, for maximum recording time (3 times SP).

NOTE: The selected Record Speed will appear on the front panel display and on-screen display.

Maximum Recording Time - SP vs. SLP

Tape Length	SP (Standard Play)	SLP (Super Long Play)
T-120	2 hrs	6 hrs
T-160	2hrs 40 mins	8 hrs
T-180	3 hrs	9 hrs

How to Set a Timer Recording

Insert a blank videotape into the VCR deck. Be sure to leave the Record Safety Tab intact.

With the Timer Recording function, you can program up to 7 events at a time to record up to a month in advance.

To Begin Setting the Timer Recording,

•Turn on your DVD-VCR, and

•Turn on your TV.

1Open “MENU”

Press the MENU button or the TIMER button while the VCR is in Stop or Play mode.

2Select “Program”

Use the UP/DOWN buttons to highlight “PROGRAM” then press the ENTER button.

3Select Channel Number

Use the Right and UP/DOWN buttons to set the channel. Press the RIGHT button to move to the next setting.

4Set “Time/Date/Speed”

Repeat Step 3 above to set start time, end time, date and record speed. Date can be set for one time, daily or weekly recording. See below.

5Daily/Weekly Date Programming

Press the RETURN button to finish setting the timer recording. Stop the VCR or turn the power off. Then the VCR will automatically turn on and begin recording at the time you set. To stop the timer recording, press the POWER button or press the

(STOP) button twice.

Timer Program

If you want to set the timer program,

press the ENTER key

6Auto Speed Select

If the length of the videotape is not long enough for a timer recording in the SP mode, set the recording tape speed to “AUTO”. Recording will start in the SP mode. If the length is not long enough, the tape speed will automatically change from SP mode to SLP mode.

7Save “Timer Recording”

Weekly [Sun’s~Sat’s]: Use this to record TV programs on the same channel at the same time every week. Daily [MO - FR] : Use this to record TV programs on the same channel at the same time every day Monday through Friday.