Basic DVD Operation, On-Screen Menu Navigation

A/V Receiver Connections

Deck Control Buttons

Basic VCR Operation

Basic TV Tuner Operations

To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD- VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers.

Before You Begin...

•If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR’s built-in Dolby Digital Decoder. Use the Digital Audio Out connection below.

To Digital Audio Input of an A/V

Receiver with a Dolby Digital Decoder

1Digital Audio Out

Connect a digital coaxial cable or an optical cable from the Digital Audio Out jack on the rear panel of the DVD-VCR to the corresponding Digital Audio Input jack on your A/V Receiver:

•Optical

•Coaxial

•Use whichever connection is available on your A/V Receiver.

The DVD-VCR uses one set of controls to operate both decks. The following buttons are helpful in successfully controlling each deck.

1POWER Button

Press the POWER button on the remote control or front panel to turn on the DVD-VCR.

2DVD Button

Press the DVD button on the remote control or front panel when you want to control the DVD deck.

•The DVD indicator will light on the Front Panel Display to show that the DVD deck is selected.

3VCR Button

Press the VCR button on the remote control or front panel when you want to control the VCR deck.

•The VCR indicator will light on the Front Panel Display to show that the VHS deck is selected.

4INPUT SEL. Button

Press the INPUT SEL. button repeatedly to cycle through all of your input sources, including the Tuner(Ch##), Line 1 (rear AV input), and Line 2 (front AV input).

•Input selection is only available when the VCR deck is selected.

Basic DVD Operation

Follow the instructions below to playback a DVD.

1Open the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the front panel of the unit to turn on the power and open the disc tray.

2Insert a Disc

Put a disc in the center of the tray, with the label- printed side facing up.

3Close the Disc Tray

Press the OPEN/CLOSE button on your remote control or on the front panel of the unit to close the disc tray.

4Play a DVD

Press the ❿ll(PLAY/PAUSE) button on your remote control or on the front panel of the unit.

•Most discs will start to playback as soon as the tray closes.

•If a DVD has a MENU, the menu may pop up on TV screen.

5Additional DVD Options

•See pages 16 ~ 21 for advanced DVD Setup options.

•See pages 22 ~ 28 for special DVD Playback features.

To play a standard VHS videotape, just insert it into the VCR deck and press the PLAY button. You can turn on the Auto Play to enable the VCR deck to play automatically when you insert a videotape that is missing the Record Safety Tab. See page 29.

1Insert VHS Tape

Insert a standard VHS videotape into the VCR deck.

•When a videotape is inserted, power will turn on automatically.

2Play Tape

Press the ❿ll(PLAY/PAUSE) button on the remote control or on the front panel of the unit. The videotape will begin to play automatically if it is missing the Record Safety Tab and Auto Play is turned on. See page 28.

3Stop Playback

Press the ■ (STOP) button on the remote control or on the front panel of the unit.

4Additional VCR Options

•See pages 28~29 for special VCR Playback features.

•See pages 31~32 for VCR Recording features.

•See page 33 for Timer Recording features.

When watching TV using the DVD-VCR's built-in TV tuner, use the buttons below.

1TV/VCR

Press this button to switch between your TV’s tuner and the VCR’s internal tuner.

•You don’t need to press the TV/VCR button in vcr mode.

2Channel UP/DOWN

Use these buttons to move to the previous or the next channel.

30-9 Buttons

Use these buttons to select the desired channel directly.

4100 + Buttons

Press this button tune to channels 100 and above. First, press the 100+ button, then use the numeric buttons(0-9) to enter the remaining digits of the channel numeber desired.

•This button is activated only in Cable TV Mode.

5INFO. Button

Press this button to display the current channel.

•This also works in DVD and VCR mode.

On-Screen Menu Navigation

The on-screen menus allow you to enable or disable various functions on your DVD-VCR. Use the following buttons to open and navigate through the on-screen menus.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

1MENU Button

Press this button while the DVD is in Stop or Play mode to open the on-screen MAIN MENU.

2UP/DOWN and LEFT/RIGHT

Use these buttons to move the selection bar UP/DOWN and LEFT/RIGHT to cycle through the menu options.

3ENTER Button

Press this button to confirm any new settings.

4RETURN Button

Press this button to return to the last MENU screen displayed or to exit the on-screen MENU all together.

ENG-10

ENG-11