Open Menu, Select Setup, Select Clock, ENG-13

Menu Language

Manual Clock Set

Tuner Band Setting

RF Output Channel

To change the on-screen MENU language to English, French or Spanish, follow these steps.

1Open “MENU”

Press the MENU button while the DVD is in Stop or Play mode.

2Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP” then press ENTER to select.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

If Auto Setup fails to set the DVD-VCR’s internal clock by locating a local TV station, follow these steps to set the date and time manually.

NOTE: For accurate Timer Recording, your DVD-VCR's internal clock must be set correctly.

1Open “MENU”

Press the MENU button while the DVD is in Stop or Play mode.

2Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP” then press ENTER to select.

3Select “Clock”

Use the UP/DOWN buttons to highlight “Clock ” then press the ENTER button.

This feature allows you to manually set the DVD-VCR’s tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup.

•Use this setting only if Auto Setup detected the incorrect tuner band, i.e. channels are coming in on the wrong channel numbers.

1Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

2Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “SETUP” then press ENTER to select.

3Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel”, then press ENTER to select.

1Open “MENU”

With the DVD in Stop or Play mode, press the MENU button.

2Select “SETUP”

Using the UP/DOWN buttons, move the selection bar to “Setup” then press ENTER to select.

3Select “Channel”

Using the UP/DOWN buttons, move the selection bar to “Channel,” then press ENTER to select.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

Language	: English
Front Display	: Auto
Auto Power Off	: Off

3 Select “Language”

Use the UP/DOWN buttons to highlight “Language” then press the ENTER button.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

4Select “RF Output CH”

Move the selection bar to “RF Output CH”, then press right to change.

4Set menu Language

Place the selection bar next to your desired Language, then press the ENTER button.

Language	: English
Front Display	: Auto
Auto Power Off	: Off

4Select “Manual Clock”

Move the highlight to “Manual Clock”, then press the ENTER button.

• The Clock Set/Adjust menu will change as shown.

5Set the Clock

Use the LEFT/RIGHT buttons to select each of the following options, then use the UP/DOWN buttons

to set each option:

• Hour – Set the hour

• Month – Set the month.

•Minute – Set the minute. • Day – Set the day.

•Year – Set the year

Manual Clock

2004 THU

6Confirm Settings

Press the RETURN button to confirm your clock settings and to return to the Clock Set/Adjust.

•Press the RETURN button three times to exit the menu.

ENG-12

4Select “Ant./Cable”

Move the selection arrow to “Ant./Cable” then press RIGHT button to select from the following options:

•Antenna - Indicates that the DVD-VCR is connected to an indoor or outdoor VHF/UHF antenna.

•Cable TV - Indicates that the DVD-VCR is connected to Cable TV.

Ant./Cable	: Antenna	Cable TV
RF Output CH	: 3CH	Antenna
Auto Channel Memory
Channel Add/Delete

Ant./Cable	: Antenna	3CH
RF Output CH	: 4CH
		4CH
Auto Channel Memory

Channel Add/Delete

5Change “RF Output CH”

A message will appear on your TV. Then press ENTER to change.

6Change “TV Channel”

A message will appear on your TV. When the message disappears, change your TV to channel 3 or 4 to match the RF output channel of the player.