Samsung VR330S, DVD-VR330 instruction manual Channel Add/Delete, RF Output Channel

4	Press the …† buttons to select Auto Channel
	Memory, then press the ENTER or √ button.

4	Press the …† buttons to select Channel
	Add/Delete, then press the ENTER or √ button.

Auto Channel Memory

Total channel numbers : 02/125 Saved channel :

1%

Stop

DVD-Recorder		Channel Add/Delete
No Disc
Timer Rec.
Setup	Select channel :		1
	Add	Delete

NUMBER ENTER RETURN EXIT

	• The DVD Recorder & VCR will automatically
	search for all available channels in the selected
	tuner band. This procedure may take a few
	minutes to complete.
	• When finished, the lowest channel will be dis-
	played.
SetupystemS	• If you want to stop or cancel scanning, press the
	ENTER button. Then select ‘YES’.

Channel Add/Delete

Use this feature if Auto Channel Memory missed a channel that you would like to add or if you wish to remove a channel.

	With the unit in Stop mode/No Disc mode, press
1 the MENU button.
	Press the …† buttons to select Setup, then press
2 the ENTER or √ button.
	Press the …† buttons to select Channel Set, then
3 press the ENTER or √ button.
		DVD-Recorder		Channel Set
		No Disc
		Timer Rec.	Antenna/Cable TV : Antenna		√
		Setup	Auto Channel Memory		√
			Channel Add/Delete		√
			RF Output Channel : CH3		√
		MOVE	ENTER	RETURN	EXIT

Press the …† or number buttons to select the
5 channels you want to add or delete on the Select
channel screen. Then, press the ENTER button.
• Using CH/TRK ( /			) buttons for channel selection
allows the user to add/delete one channel at a time.
• Using …† buttons for channel selection jumps to					System
the next channel memorized in Auto Channel
Memory.
					Setup
6 then press the ENTER button.
Press the œ √ buttons to select Add or Delete,
	DVD-Recorder		Channel Add/Delete
	No Disc
	Timer Rec.
	Setup	Select channel : 11
		Channel is added.
		Add	Delete
	NUMBER	ENTER	RETURN	EXIT

RF Output Channel

When you connect the DVD Recorder & VCR to your TV with the RF Antenna Cable, follow the steps below to set the RF Output Channel.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the ENTER or √ button.

34 - English