Samsung DVD-VR330, VR330S TV Aspect, Input Level, Black Level, 3D Noise Reduction, Off Normal

Setting Up the Display(Video) Options

This function allows you to setup the TV screen settings.

		With the unit in Stop mode/No Disc mode, press
1 the MENU button.
		Press the …† buttons to select Setup, then press
2 the ENTER or √ button.
			DVD-Recorder			Setup
			No Disc
			Timer Rec.	System		√
			Setup	Clock Set		√
				Channel Set		√
				Language		√
				Audio		√
				Video		√
				Parental Control		√
			MOVE	ENTER	RETURN	EXIT
		Press the …† buttons to select Video, then press
	3 the ENTER or √ button.
		Video option menu will be displayed.
			DVD-Recorder			Video
			No Disc
			Timer Rec.	TV Aspect	: 16:9 Wide √
			Setup	Input Level	: Darker	√
				Black Level	: 7.5 IRE	√
				3D Noise Reduction : Off		√
			MOVE	ENTER	RETURN	EXIT
		Press the …† buttons to select the desired video
	4 option, then press the ENTER or √ button.
		Press the …† buttons to select the desired item,
5 then press the ENTER or √ button.
		Press the RETURN or œ button to return to the
		previous menu.
	Note
		Press the MENU button to exit the menu.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)

•4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD sup- plies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

•4:3 Pan & Scan : Select this for a conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

•16:9 Wide : You can view the full 16:9 picture on your wide-screen TV.

Input Level

Adjusts the level of the input signal.

•Darker : If you feel the screen is too light and you want to make the screen darker.

•Lighter : If you feel the screen is too dark and you want to make the screen lighter.

Black Level

Adjusts the black level of the screen.

•7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs.

Select this when you want to make the screen lighter.

•0 IRE : This is the standard NTSC reference black level for consistent brightness/contrast across all sources.

Select this when you want to make the screen darker.

3D Noise Reduction

•Off : Normal

•On : Select to remove noise from the screen.

This function depends on disc type. It may not

Note work for some disc types.

IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to peak (p-p) video amplitude.

System Setup

English - 37