Samsung VR330S, DVD-VR330 instruction manual Playing the VCR, Tracking

Playback

5-1If you press the √ll button, the Slide Show Speed screen will appear.

Press the œ√ buttons to set the slide show speed, then press the ENTER button.

	Slide Show Speed
	Slow	Normal		Fast
JPEG01
MOVE	PHOTO		ENTER		RETURN

5-2Press the ENTER button with a picture selected in the Album screen and select a display mode (Album screen ( ), Slide show ( ), Rotation ( ) or Zoom ( )) using the œ √ buttons, then press the ENTER button.

JPEG01
MOVE	PHOTO	ENTER	RETURN

: Returns to the Album screen.

: The unit enters slide show mode.

Before the slide show can begin, the picture interval (Slide show speed) must be set.

: Each time the ENTER button is pressed, the picture rotates 90 degrees clockwise.

: Each time the ENTER button is pressed, the picture is enlarged up to 4X(four times the normal size).

➝normal size ➝ 2X ➝ 4X ➝ 2X

•Press the ANYKEY button to display menu bar.

•Press the RETURN button to clear the menu bar.

Playing the VCR

1 Insert a standard VHS tape into the VCR deck.

•When a tape is inserted, power will turn on auto- matically.

Press the √II(PLAY/PAUSE) button on the

2 remote control or on the front panel of the unit. The videotape will begin to play automatically if the Record Safety Tab is removed and Auto Play is turned on.

Record Safety Tab

3 Press the (STOP) button on the remote control or on the front panel of the unit.

Tracking

The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The CH/TRK ( / ) button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.

Adjust Tracking Manually During playback, press

1 the CH/TRK ( / ) buttons to remove white lines from the picture.

56 - English