I N S TA L L AT I O N
5
Connect another cable between the other OUT terminal on the splitter and the
Incoming
Cable
Splitter |
|
|
| RF (A/B) |
|
| Cable Box |
| Switch |
|
|
| ||
|
|
|
|
6
Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the back of the TV.
Incoming
Cable
Splitter
|
| ANT IN |
| RF (A/B) | TV Rear |
| Switch | |
Cable Box |
| |
|
|
After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
12