Samsung CL17M2MQ manual Connecting VHF and UHF Antennas, Antennas with 300-ohm Flat Twin Leads

Page 9

Chapter Two

I N S TA L L AT I O N

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page.

If you have two antennas, see “Separate

VHF and UHF Antennas” on next page.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.

1

Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

2

Plug the adaptor into the
VHF/UHF terminal on the
bottom of the back panel.	ANT IN

9

Image 9

Contents Owner’s Instructions Installation Your New TVOperation Special Features TroubleshootingAppendix Chapter One List of Features« VOL , + Stand by indicator Remote Control SensorPower CH and CH Familiarizing Yourself with The TVSide Panel Jacks Devices For private listeningDevices Rear Panel Jacks Connect video from a DVD playerMode « Number buttons Remote Control+100 VOL -, VOL +Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter Cable Box Unplug the cable or Antenna from the back Connecting a VCRConnect the cable or Antenna to Antenna in terminal onConnect a set of audio Connecting a DVD Player 480i OptionConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Press the Power button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Press the Menu button to display the menuPress the Exit button to exit Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Directly Accessing Channels Using the Channel ButtonsUsing the PRE-CH Button to select the Previous Channel Changing ChannelsPress the Menu button to display menu Customizing the PictureUsing Automatic Picture Settings Adjusting the Volume Using MuteCustomizing the Sound Using Automatic Sound Settings Press the ˇ or ˆ buttonTo increase or decrease the value of a particular item Press the Menu button to display the on-screen menu Setting the ClockSimply press Viewing a VCR or Camcorder TapePress the ˇ and ˆ but- tons to adjust the fine tun- ing Fine Tuning ChannelsPress the or button to select Color Tone Selecting the Color ToneChanging the Screen Size Screen display will read Surf off Using the Surf FeaturePress the or button to select MTS Choosing a Multi-Channel Sound MTS SoundtrackAuto Volume Extra Sound SettingsPM appears to the right of the hour Setting the On/Off TimerSetting the Sleep Timer Viewing Closed Captions Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications