Samsung TXN 1430F manual Connecting VHF and UHF Antennas, Antennas with 300-ohm Flat Twin Leads

Page 14

Chap ter Tw o

I N S TA L L AT I O N

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below.

If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2.

If you have two antennas, see “Separate

VHF and UHF Antennas,” on page 2.2.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat leads, follow the directions below.

1

Place the wires from the twin leads under the screws on the 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

2

Plug the adaptor into the VHF/UHF terminal on the bottom of the back panel.

2.1 CHAPTER TWO: INSTALLATION

Image 14

Contents Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Read these instructions Operation InstallationYour New TV Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV VHF/UHF Antenna terminal Rear Panel JacksDVD Video input jacks Option ¨ +100 Remote ControlNumber buttons SleepSize ´ Number buttons+100 SET˘ PIP Controls Not available Remote Control ¯ VCR Controls∙ F.F Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnect this cable to a two-way splitter Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels S TA L L AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TVConnecting a Camcorder Connecting a DVD Player OptionInstalling Batteries in the Remote Control Viewing the Menus and On-Screen Displays Press the Power button on the remote controlTurning the TV On and Off Viewing the MenusSelecting a Menu Language ANT antenna STD, HRC or IRC all cable TV Selecting the Video Signal-sourceMemorizing the Channels Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsSetting the Clock Or CH button repeat- edly until the correct hour appearsCustomizing the Picture Press the Menu button to display the menuUsing Automatic Picture Settings Using Automatic Sound Settings Press the Menu button twice to exit Viewing a VCR or Camcorder TapePress the VOL+ or VOL- button Turn off your VCR or Customizing Your Remote ControlSetting Up Your Remote Control to Operate Your VCR or DVD VCR Codes DVD Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Changing the Screen Size Using the Surf Feature Setting the On/Off Timer Press the Sleep button on the remote control Setting the Sleep TimerWhen finished, press the VOL + button Sound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, or Surround SurroundViewing Closed Captions Press the Menu button three times to exit Using the V-ChipSetting Up Your Personal ID Number PIN How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesParental guidance TV-Y Young children TV-Y7 Children 7 and overGeneral audience TV-14E C I a L F E AT U R E S Repeatedly press the CH Button to select a General audience no restrictionsIdentifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country