Samsung TXN 2022, TXN 1634F, TXN 1430F manual Chapter Five, Identifying Problems

Page 48

Chapter Five

T R O U B L E S H O O T I N G

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center.

Identifying Problems

Problem	Possible Solution
Poor picture	Try another channel.
	Adjust the antenna.
	Check all wire connections.

Poor sound quality.	Try another channel.
	Adjust the antenna.

No picture or sound.	Try another channel.
	Press the TV/VIDEO button.
	Make sure the TV is plugged in.
	Check the antenna connections.

No color, wrong colors or tints.	Make sure the program is broadcast in color.
	Adjust the picture settings.
	If the set is moved or turned in a different
	direction, the power should be OFF for
	at least 30 minutes.

Picture rolls vertically.	Adjust the antenna.
	Check all wire connections.

The TV operates erratically	Unplug the TV for 30 seconds, then try
	operating it again.

The TV won’t turn on.	Make sure the wall outlet is working.

CHAPTER FIVE: TROUBLESHOOTING 5.1

Image 48

Contents Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Read these instructions Installation Your New TVOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Rear Panel Jacks DVD Video input jacks OptionVHF/UHF Antenna terminal Remote Control Number buttons¨ +100 Sleep´ Number buttons +100Size SETRemote Control ¯ VCR Controls ∙ F.F˘ PIP Controls Not available Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter S TA L L AT I O N Connecting a VCR Unplug the cable or antenna from the back of the TVConnecting a Camcorder Connecting a DVD Player OptionInstalling Batteries in the Remote Control Press the Power button on the remote control Turning the TV On and OffViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsANT antenna STD, HRC or IRC all cable TV Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsSetting the Clock Or CH button repeat- edly until the correct hour appearsCustomizing the Picture Press the Menu button to display the menuUsing Automatic Picture Settings Using Automatic Sound Settings Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonPress the Menu button twice to exit Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDTurn off your VCR or VCR Codes DVD Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Changing the Screen Size Using the Surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press the VOL + buttonPress the Sleep button on the remote control Sound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, or Surround SurroundViewing Closed Captions Using the V-Chip Setting Up Your Personal ID Number PINPress the Menu button three times to exit How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesTV-Y Young children TV-Y7 Children 7 and over General audienceParental guidance TV-14E C I a L F E AT U R E S Repeatedly press the CH Button to select a General audience no restrictionsIdentifying Problems Chapter FiveCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications