Samsung CHT-500 Connecting DVD-VCR to the TV using the Coaxial Cable, Socket on your

Page 11

Connecting DVD-VCR to the TV using the Coaxial Cable

GB

To receive television programmes a signal must be received from one of the following sources:

◆An outdoor aerial

◆An indoor aerial

◆A cable television network

◆A satellite receiver

☛Make sure that both the television and the DVD-VCR are switched off before connecting the cables.

1Remove the aerial or network input cable from the television.

2Connect this cable to the 75Ω coaxial socket marked on the rear of your DVD-VCR.

3	Plug the coaxial cable supplied into the		TV		socket on your

	DVD-VCR.

4Plug the other end of the coaxial cable into the connector previously used for the aerial on the television.

5To obtain better pictures and sound quality on your television, you can also connect your DVD-VCR to the television via the SCART cable (see section below) if your television is equipped with this type of connection.

	DVD & VCR	AUX
		AUX
		AUDIO
	IN	OUT
	.	R
	.
		L
	2
		VIDEO
TV	DVD & VCR	AUX
TV		AUX
		AUDIO
	IN	OUT
	RADIO ANT.	R
	FM
	75	L
	COAXIAL
	AM
	VIDEO
	4
	3

Connecting DVD-VCR to the TV using the SCART Cable

Aerial
TV
DVD & VCR	AUX
	AUX
	AUDIO
IN	OUT
RADIO ANT.	R
RADIO ANT.
FM
75	L
COAXIAL	2
	2
AM
3	VIDEO
3
SCART Cable
RF coaxial cable

You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is available on the television. You thus:

◆Obtain better quality sound and pictures

◆Simplify the setting up procedure of your DVD-VCR

☛◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.

◆ Make sure that both the television and the DVD-VCR are switched off before connecting the cables.

1Connect the coaxial cable as indicated in the above section.

2Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.

3Plug the other end into the appropriate connector on the television.

11

Image 11

Contents CHT-500 Contents Playing Back Symbols Safety Instructions Playback Region Number Disc Type and CharacteristicsDisc Markings 10 11 12 Front View of the DVD-VCRRear View of the DVD-VCR 33 UP 34 OK Infrared Remote ControlShuttle PROG/TRKAccessories Display IndicatorsConnector Location Type Deciding How to Connect DVD-VCRSocket on your Connecting DVD-VCR to the TV using the Coaxial CableConnecting DVD-VCR to the TV using the Scart Cable AV2 in By means of 21-pin Scart Cable AV1EURO AV By means of 21-pin Scart CableBy means of RF Coaxial Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys Prog Button Inserting Batteries in the Remote ControlBasic TV Tuner Operations TV/VCR ButtonCopy the DVD to VHS Tape Copying from DVD to VCRInsert VHS Tape Insert a blank VHS videotape into the VCR deckSelect Language Setting the Date and TimeSetting the Menu Language Open MenuPresetting the Stations Automatically If you Then Presetting the Stations Manually13 To...Then Clearing a Preset Station Changing the Preset Station Table Selected Selecting the RF OUT Sound Mode G-KSetting the DVD-VCR Output Channel Press the # or ❷ buttons, until the TV System option isPress OK or ❿, until VCR Selecting the Colour ModeIntelligent Picture Control Off 1Hour 2Hour 3Hour VCR Auto Power OffVCR ShowView Extend Press Return twice to exit the menu Screen MessagesSelecting the Cassette Type E180 E240 300 E260VHS Play VCR Repeat PlaySelecting the Recording Speed VCR Recording a Programme Immediately VCR Protecting a Recorded CassetteThis function is not available in DVD recording If you wish to cancel the recording before the end, pressRecording a Programme with Automatic Stop To enter a ShowView, press the Timer button VCR Using the ShowViewIf you wish to Then Modifying ShowView ProgrammingUsing the Timer Programming Feature On completion, press Return three times Checking a Preset RecordingCancelling a Preset Recording Stop the playback Eject the cassette Adjusting Picture Alignment ManuallyPlaying a Cassette Then pressOption Description Selecting the Audio Output ModePlaying a Cassette in Slow Motion Playing a Sequence at Variable Speeds This DVD-VCR uses a standard indexing system Viss Searching for a Specific SequenceIntro Scan Searching for a Specific SequencePress Info Using the Tape CounterIf the remaining time is to be calculated correctly, you VCR Connecting an RCA Audio/Video Input Cable Recording from Another VCR or Camcorder CD, DVD Audio Dubbing a Pre-recorded CassetteButton Function Brand CodesComponent Choosing a ConnectionConnection to an Television Using the Disc Menu Language Setting Up the Language FeaturesUsing the Subtitle Language DVD Setting Up the Language FeaturesUsing the Audio Language DVD Setting Up the Audio OptionsAbout the Rating Level DVD Setting Up the Parental ControlOk your password again. The Parental Setup screen appears About the Change PasswordConnect S-Video Out to TV Setting Up the Display OptionsSends Component Interlace signal from Video Connections for DVDTo Component Input on Your TV Component Connections for DVDSpecial Playback Features For 43 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV For 169 aspect ratio discsPan Scan Adjusting the Aspect Ratio EZ ViewIf you are using a 43 TV For 169 aspect ratio discs Letter BoxWhen Playing a DVD Using the Display Function DVD/VCD/CDSelecting the Subtitle Language Using the Angle buttonUsing the Subtitle button Changing the Camera AngleRepeat Play Using the Zoom DVD/VCDSelecting the Audio Language Repeat Chapter/TitleClearing a Mark DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD/ VCD Recalling a Marked SceneMP3-CD Playback MP3-CD PlaybackWMA Disc Playback DVD WMA PlayDo not try recording copyright protected MP3 files MP3/WMA PlayCD-R MP3/WMA discs Your MP3 or WMA files should be ISO 9660 or Joliet formatDVD Program Play & Random Play Thumbnail screen Picture CD PlaybackCD-R Jpeg Discs DVD Picture CD PlaybackDistance of a m Setting ms Distance of B m Setting the Delay TimeSetting the Center Speaker Setting the Surround SpeakersFront Speakers About Speaker SetupCenter Speaker Surround SpeakersPress the Bass or Treble button Press the Speaker buttonStop mode, press the Test button Dolby Pro Logic Sound Mode FunctionSound Mode Press l or ❿❿l to tune in to a lower or higher frequency Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Listening to the RadioPresetting Stations Output Technical SpecificationsInput Problem Explanation/Solution Problems and Solutions VCRProblem Action Troubleshooting Guide DVDElectronics