Samsung CHT-500 instruction manual Brand Codes, Button Function

Page 45

Using the TV Buttons on the Remote Control							VCR
							GB
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible, follow the
instructions below.							1
1	Switch your television on.
2	Point the remote control towards the television.
3	Hold down the TV button and enter the two-figure code					2	2
							2

	corresponding to the brand of your television, by pressing the
	appropriate numeric buttons.
	Brand		Codes	Brand	Codes
	SAMSUNG		01 to 06	PHILIPS	02, 20, 22
	AKAI		09, 23	SABA	13, 14, 22 to 24		3
	GRUNDIG		09, 17, 21	SONY	15, 16
	LOEWE		02	THOMSON	13, 14, 24
	PANASONIC		08, 23 to 27	TOSHIBA	07, 16 to 19, 21	4
	Result:	If your television is compatible with the remote control,
		it will switch off. It is now programmed to operate with				4
		the remote control.				4
		the remote control.
	➢ If several codes are indicated for your television brand, try
	each one in turn until you find one that works.
	☛ When you change the batteries in the remote control, you					5
	☛ When you change the batteries in the remote control, you
	must reprogramme the code, following the same
	procedure.
You can then control the television using the following buttons.						5
Button			Function
							6

TV STANDBY/ON ➀ Used to switch the television on and off.

TV or VCR ➁	Used to switch between the TV and VCR
	modes.

INPUT SEL. ➂	Used to select an external source.

VOL + or – ➃	Used to adjust the volume of the television.

PROG/TRK ➄	Used to select the required programme.
( or )

TV MUTE ➅	Used to mute the volume of the television.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

45

Image 45

Contents CHT-500 Contents Playing Back Symbols Safety Instructions Disc Type and Characteristics Disc MarkingsPlayback Region Number Front View of the DVD-VCR Rear View of the DVD-VCR10 11 12 Shuttle Infrared Remote ControlPROG/TRK 33 UP 34 OKAccessories Display IndicatorsConnector Location Type Deciding How to Connect DVD-VCRConnecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableSocket on your AV1EURO AV By means of 21-pin Scart Cable By means of RF Coaxial CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys Basic TV Tuner Operations Inserting Batteries in the Remote ControlTV/VCR Button Prog ButtonInsert VHS Tape Copying from DVD to VCRInsert a blank VHS videotape into the VCR deck Copy the DVD to VHS TapeSetting the Menu Language Setting the Date and TimeOpen Menu Select LanguagePresetting the Stations Automatically Presetting the Stations Manually 13 To...ThenIf you Then Clearing a Preset Station Changing the Preset Station Table Setting the DVD-VCR Output Channel Selecting the RF OUT Sound Mode G-KPress the # or ❷ buttons, until the TV System option is SelectedPress OK or ❿, until VCR Selecting the Colour ModeIntelligent Picture Control VCR Auto Power Off VCR ShowView ExtendOff 1Hour 2Hour 3Hour Selecting the Cassette Type Screen MessagesE180 E240 300 E260 Press Return twice to exit the menuVHS Play VCR Repeat PlaySelecting the Recording Speed VCR Recording a Programme Immediately VCR Protecting a Recorded CassetteIf you wish to cancel the recording before the end, press Recording a Programme with Automatic StopThis function is not available in DVD recording To enter a ShowView, press the Timer button VCR Using the ShowViewIf you wish to Then Modifying ShowView ProgrammingUsing the Timer Programming Feature Checking a Preset Recording Cancelling a Preset RecordingOn completion, press Return three times Playing a Cassette Adjusting Picture Alignment ManuallyThen press Stop the playback Eject the cassetteSelecting the Audio Output Mode Playing a Cassette in Slow MotionOption Description Playing a Sequence at Variable Speeds This DVD-VCR uses a standard indexing system Viss Searching for a Specific SequenceIntro Scan Searching for a Specific SequenceUsing the Tape Counter If the remaining time is to be calculated correctly, youPress Info VCR Connecting an RCA Audio/Video Input Cable Recording from Another VCR or Camcorder CD, DVD Audio Dubbing a Pre-recorded CassetteButton Function Brand CodesChoosing a Connection Connection to an TelevisionComponent Using the Disc Menu Language Setting Up the Language FeaturesDVD Setting Up the Language Features Using the Audio LanguageUsing the Subtitle Language DVD Setting Up the Audio OptionsOk your password again. The Parental Setup screen appears DVD Setting Up the Parental ControlAbout the Change Password About the Rating LevelSends Component Interlace signal from Setting Up the Display OptionsVideo Connections for DVD Connect S-Video Out to TVTo Component Input on Your TV Component Connections for DVDSpecial Playback Features To play back using aspect ratio DVD Adjusting the Aspect Ratio EZ ViewIf you are using a 169 TV For 169 aspect ratio discs For 43 aspect ratio discsIf you are using a 43 TV Adjusting the Aspect Ratio EZ ViewFor 169 aspect ratio discs Letter Box Pan ScanWhen Playing a DVD Using the Display Function DVD/VCD/CDUsing the Subtitle button Using the Angle buttonChanging the Camera Angle Selecting the Subtitle LanguageRepeat Play Using the Zoom DVD/VCDSelecting the Audio Language Repeat Chapter/TitleUsing the Mark Function DVD/ VCD DVD Using the Mark Function DVD/VCDRecalling a Marked Scene Clearing a MarkMP3-CD Playback MP3-CD PlaybackWMA Disc Playback DVD WMA PlayCD-R MP3/WMA discs MP3/WMA PlayYour MP3 or WMA files should be ISO 9660 or Joliet format Do not try recording copyright protected MP3 filesDVD Program Play & Random Play Thumbnail screen Picture CD PlaybackCD-R Jpeg Discs DVD Picture CD PlaybackSetting the Center Speaker Setting the Delay TimeSetting the Surround Speakers Distance of a m Setting ms Distance of B mCenter Speaker About Speaker SetupSurround Speakers Front SpeakersPress the Speaker button Stop mode, press the Test buttonPress the Bass or Treble button Sound Mode Function Sound ModeDolby Pro Logic Press and hold l or ❿❿l to begin automatic tuning Automatic TuningListening to the Radio Press l or ❿❿l to tune in to a lower or higher frequencyPresetting Stations Technical Specifications InputOutput Problem Explanation/Solution Problems and Solutions VCRProblem Action Troubleshooting Guide DVDElectronics