Samsung CHT-500 instruction manual Recording a Programme with Automatic Stop

Page 31

Recording a Programme with Automatic Stop

VCR

GB

This function enables you to record up to nine hours (LP) of programmes.

Your DVD-VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG ( or ) buttons or

◆The AV1, AV2 or AUX source using the INPUT SEL. button for a satellite tuner or external video source

Result: The channel number is displayed and the

programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 29).

6Hold the REC button ( ●) down for a while to start recording. Result: The record indicator appears on the television screen

and DVD-VCR display. An index is recorded on the tape (see page 39).

7Press the REC button ( ●) several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD- VCR stops recording automatically and power off.

8If you wish to cancel the recording before the end, press

STANDBY/ON.

☛If the end of the tape is reached while recording: ◆ The recording stops and power off.

EJECT

3

4

4

6

5

LENGTH 2:30

SET LENGTH :

PRESS REC ●

☛This function is not available in DVD recording

31

Image 31

Contents CHT-500 Contents Playing Back Symbols Safety Instructions Disc Markings Disc Type and CharacteristicsPlayback Region Number Rear View of the DVD-VCR Front View of the DVD-VCR10 11 12 33 UP 34 OK Infrared Remote ControlShuttle PROG/TRKAccessories Display IndicatorsConnector Location Type Deciding How to Connect DVD-VCRConnecting DVD-VCR to the TV using the Scart Cable Connecting DVD-VCR to the TV using the Coaxial CableSocket on your By means of RF Coaxial Cable AV1EURO AV By means of 21-pin Scart CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys Prog Button Inserting Batteries in the Remote ControlBasic TV Tuner Operations TV/VCR ButtonCopy the DVD to VHS Tape Copying from DVD to VCRInsert VHS Tape Insert a blank VHS videotape into the VCR deckSelect Language Setting the Date and TimeSetting the Menu Language Open MenuPresetting the Stations Automatically 13 To...Then Presetting the Stations ManuallyIf you Then Clearing a Preset Station Changing the Preset Station Table Selected Selecting the RF OUT Sound Mode G-KSetting the DVD-VCR Output Channel Press the # or ❷ buttons, until the TV System option isPress OK or ❿, until VCR Selecting the Colour ModeIntelligent Picture Control VCR ShowView Extend VCR Auto Power OffOff 1Hour 2Hour 3Hour Press Return twice to exit the menu Screen MessagesSelecting the Cassette Type E180 E240 300 E260VHS Play VCR Repeat PlaySelecting the Recording Speed VCR Recording a Programme Immediately VCR Protecting a Recorded CassetteRecording a Programme with Automatic Stop If you wish to cancel the recording before the end, pressThis function is not available in DVD recording To enter a ShowView, press the Timer button VCR Using the ShowViewIf you wish to Then Modifying ShowView ProgrammingUsing the Timer Programming Feature Cancelling a Preset Recording Checking a Preset RecordingOn completion, press Return three times Stop the playback Eject the cassette Adjusting Picture Alignment ManuallyPlaying a Cassette Then pressPlaying a Cassette in Slow Motion Selecting the Audio Output ModeOption Description Playing a Sequence at Variable Speeds This DVD-VCR uses a standard indexing system Viss Searching for a Specific SequenceIntro Scan Searching for a Specific SequenceIf the remaining time is to be calculated correctly, you Using the Tape CounterPress Info VCR Connecting an RCA Audio/Video Input Cable Recording from Another VCR or Camcorder CD, DVD Audio Dubbing a Pre-recorded CassetteButton Function Brand CodesConnection to an Television Choosing a ConnectionComponent Using the Disc Menu Language Setting Up the Language FeaturesUsing the Audio Language DVD Setting Up the Language FeaturesUsing the Subtitle Language DVD Setting Up the Audio OptionsAbout the Rating Level DVD Setting Up the Parental ControlOk your password again. The Parental Setup screen appears About the Change PasswordConnect S-Video Out to TV Setting Up the Display OptionsSends Component Interlace signal from Video Connections for DVDTo Component Input on Your TV Component Connections for DVDSpecial Playback Features For 43 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV For 169 aspect ratio discsPan Scan Adjusting the Aspect Ratio EZ ViewIf you are using a 43 TV For 169 aspect ratio discs Letter BoxWhen Playing a DVD Using the Display Function DVD/VCD/CDSelecting the Subtitle Language Using the Angle buttonUsing the Subtitle button Changing the Camera AngleRepeat Play Using the Zoom DVD/VCDSelecting the Audio Language Repeat Chapter/TitleClearing a Mark DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD/ VCD Recalling a Marked SceneMP3-CD Playback MP3-CD PlaybackWMA Disc Playback DVD WMA PlayDo not try recording copyright protected MP3 files MP3/WMA PlayCD-R MP3/WMA discs Your MP3 or WMA files should be ISO 9660 or Joliet formatDVD Program Play & Random Play Thumbnail screen Picture CD PlaybackCD-R Jpeg Discs DVD Picture CD PlaybackDistance of a m Setting ms Distance of B m Setting the Delay TimeSetting the Center Speaker Setting the Surround SpeakersFront Speakers About Speaker SetupCenter Speaker Surround SpeakersStop mode, press the Test button Press the Speaker buttonPress the Bass or Treble button Sound Mode Sound Mode FunctionDolby Pro Logic Press l or ❿❿l to tune in to a lower or higher frequency Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Listening to the RadioPresetting Stations Input Technical SpecificationsOutput Problem Explanation/Solution Problems and Solutions VCRProblem Action Troubleshooting Guide DVDElectronics