Samsung CHT-500 instruction manual Setting Up the Display Options, Video Connections for DVD

Page 51

Setting Up the Display Options

DVD

GB

1With the unit in Stop mode, press the MENU button.

2Select DVD using ",❷ buttons, then OK or ❿ button.

3Select Display Setup using " , ❷ buttons, then press the OK or ❿ button.

4Use the ",❷ buttons to select the desired item. Then press the OK or ❿! button.

•TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1. 4:3 L-Box :

Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2. 4:3 Pan-Scan :

Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3. 16:9 Wide :

You can view the full 16:9 picture on your widescreen TV.

•Black Level

Adjusts the brightness of the screen.(On/Off)

•NTSC Disc Output

“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “ PAL 60Hz” as is.

•DVD Out

1.RGB: Sends RGB signal from the AV JACK(SCART terminal).

2.S-Video:Sends S-VIDEO signal from the S-VIDEO JACK.

3.Video: - Sends COMPOSITE VIDEO signal from the AV JACK(SCART terminal).

-Sends COMPONENT INTERLACE signal from

COMPONENT JACK.

Setup

Setup

Setup :

Display Setup

			Display Setup

TV Aspect		: 4:3 L-Box
Black Level
NTSC Disc Output		: PAL 60Hz
DVD Out		: RGB

S-Video Connections (for DVD)	DVD

The S-Video is only for the DVD player. The tuner and VCR will still be viewed through the RF or line inputs.

You must follow the “DVD Out” instructions above to activate your alternative (S-Video) video selection.

If your television is equipped with S-Video input, you can enjoy superior video quality when watching DVDs with your DVD-VCR.

1Connect S-Video Out to TV

Connect an S-Video cable from the S-Video Out on the back panel of the DVD-VCR to the S-Video Input on your television.

DVD Only		SPEAKERS
DVD Only
COMPONENT VIDEO OUT	FRONT R	FRONT L	WOOFER
COMPONENT VIDEO OUT
	1
	SURROUND R	SURROUND L	CENTER
S-VIDEO OUT

To S-Video Input on Your TV

51

Image 51

Contents CHT-500 Contents Playing Back Symbols Safety Instructions Disc Type and Characteristics Disc MarkingsPlayback Region Number Front View of the DVD-VCR Rear View of the DVD-VCR10 11 12 33 UP 34 OK Infrared Remote ControlShuttle PROG/TRKAccessories Display IndicatorsConnector Location Type Deciding How to Connect DVD-VCRConnecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableSocket on your AV1EURO AV By means of 21-pin Scart Cable By means of RF Coaxial CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys Prog Button Inserting Batteries in the Remote ControlBasic TV Tuner Operations TV/VCR ButtonCopy the DVD to VHS Tape Copying from DVD to VCRInsert VHS Tape Insert a blank VHS videotape into the VCR deckSelect Language Setting the Date and TimeSetting the Menu Language Open MenuPresetting the Stations Automatically Presetting the Stations Manually 13 To...ThenIf you Then Clearing a Preset Station Changing the Preset Station Table Selected Selecting the RF OUT Sound Mode G-KSetting the DVD-VCR Output Channel Press the # or ❷ buttons, until the TV System option isPress OK or ❿, until VCR Selecting the Colour ModeIntelligent Picture Control VCR Auto Power Off VCR ShowView ExtendOff 1Hour 2Hour 3Hour Press Return twice to exit the menu Screen MessagesSelecting the Cassette Type E180 E240 300 E260VHS Play VCR Repeat PlaySelecting the Recording Speed VCR Recording a Programme Immediately VCR Protecting a Recorded CassetteIf you wish to cancel the recording before the end, press Recording a Programme with Automatic StopThis function is not available in DVD recording To enter a ShowView, press the Timer button VCR Using the ShowViewIf you wish to Then Modifying ShowView ProgrammingUsing the Timer Programming Feature Checking a Preset Recording Cancelling a Preset RecordingOn completion, press Return three times Stop the playback Eject the cassette Adjusting Picture Alignment ManuallyPlaying a Cassette Then pressSelecting the Audio Output Mode Playing a Cassette in Slow MotionOption Description Playing a Sequence at Variable Speeds This DVD-VCR uses a standard indexing system Viss Searching for a Specific SequenceIntro Scan Searching for a Specific SequenceUsing the Tape Counter If the remaining time is to be calculated correctly, youPress Info VCR Connecting an RCA Audio/Video Input Cable Recording from Another VCR or Camcorder CD, DVD Audio Dubbing a Pre-recorded CassetteButton Function Brand CodesChoosing a Connection Connection to an TelevisionComponent Using the Disc Menu Language Setting Up the Language FeaturesDVD Setting Up the Language Features Using the Audio LanguageUsing the Subtitle Language DVD Setting Up the Audio OptionsAbout the Rating Level DVD Setting Up the Parental ControlOk your password again. The Parental Setup screen appears About the Change PasswordConnect S-Video Out to TV Setting Up the Display OptionsSends Component Interlace signal from Video Connections for DVDTo Component Input on Your TV Component Connections for DVDSpecial Playback Features For 43 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV For 169 aspect ratio discsPan Scan Adjusting the Aspect Ratio EZ ViewIf you are using a 43 TV For 169 aspect ratio discs Letter BoxWhen Playing a DVD Using the Display Function DVD/VCD/CDSelecting the Subtitle Language Using the Angle buttonUsing the Subtitle button Changing the Camera AngleRepeat Play Using the Zoom DVD/VCDSelecting the Audio Language Repeat Chapter/TitleClearing a Mark DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD/ VCD Recalling a Marked SceneMP3-CD Playback MP3-CD PlaybackWMA Disc Playback DVD WMA PlayDo not try recording copyright protected MP3 files MP3/WMA PlayCD-R MP3/WMA discs Your MP3 or WMA files should be ISO 9660 or Joliet formatDVD Program Play & Random Play Thumbnail screen Picture CD PlaybackCD-R Jpeg Discs DVD Picture CD PlaybackDistance of a m Setting ms Distance of B m Setting the Delay TimeSetting the Center Speaker Setting the Surround SpeakersFront Speakers About Speaker SetupCenter Speaker Surround SpeakersPress the Speaker button Stop mode, press the Test buttonPress the Bass or Treble button Sound Mode Function Sound ModeDolby Pro Logic Press l or ❿❿l to tune in to a lower or higher frequency Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Listening to the RadioPresetting Stations Technical Specifications InputOutput Problem Explanation/Solution Problems and Solutions VCRProblem Action Troubleshooting Guide DVDElectronics