Samsung DVD-R125 instruction manual Setting up the Progressive scan

4 Press the …† buttons to select Video Output, then press the OK or √ button.

No Disc				Video
Programme	TV Aspect		: 16:9 Wide	√
Setup	3D Noise Reduction		: Off	√
	HDMI/DVI Resolution		: 576p	√
	Video Output		: Component √
			Component
			RGB
MOVE	OK	RETURN		EXIT

Component	Select this when the Recorder is connected
	to a TV with Component jack.
RGB	Select this when the Recorder is connected
	to your TV using SCART cable.

Setting up the Progressive scan

If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder to enjoy.

1 With the unit in Stop mode, press the P.SCAN button on the front of the DVD Recorder.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise press [No]” will appear. Press the œ √ buttons to select Yes, and then press the OK button.

System Setup

5 Press the …† buttons to select the desired item, then press the OK or √ button.

In Component mode, you can set video output to Progressive(P.SCAN) or Interlace, see page 35.

When the HDMI cable is not connected, available video output jacks are as follow.

Available Video Output Jack

		Setting mode	Component mode		RGB Mode
Output jack
			P.SCAN off mode (Interlace mode)	P.SCAN on mode
Component Output			O	O	X
(Y, Pb, Pr)				(TV in progressive mode)
AV1 Scart		R, G, B	X	X	O
		Composite	O	X	X
AV2 Scart	Composite		O	X	O
Composite Video out			O	X	O
S-Video out			O	X	O

■ When the HDMI cable is connected, other A/V output does not operate.

NOTE

Press [Yes] to confirm Progressive scan mode.

Otherwise press [No]

Yes No

2 The message “Please set your TV to Progressive input. To deactivate, press [STOP] key.” will appear. Press the OK button.

Please set your TV to Progressive input.

To deactivate, press [STOP] key.

OK

3 The message “Video Output Mode Progressive Scan” will appear.

Video Output Mode

Progressive Scan

■ When the HDMI cable is connected, this

NOTE

screen is not displayed.

■Progressive setting is only available when the Video Out is set to Component.

■Progressive setting is only available when the DVD recorder is in stop mode.

■If the P.SCAN button on the DVD recorder’s front panel is pressed during playback, the message “This function is possible only on stop mode” appears on the screen.

34- English