Samsung DVD-R125 instruction manual Sound, Timer Recording

Sound

Timer recording does not work properly.

No sound.

Checkpoint 1

Are you watching a programme in slow or skip mode?

If you are playing a programme at a speed other than normal speed, sound will not be heard.

Checkpoint 1	Re-check the recording time and the
	end time settings again.
Checkpoint 2	Recording will be cancelled if the power
	is interrupted due to a power failure or
	another similar reason while recording.

Checkpoint 2	Check the connections and settings.
Checkpoint 3	Check whether the disc is damaged.
	Clean the disc, if necessary.
Checkpoint 4	Check whether the disc is inserted
	correctly with the label facing up.

HDMI

No HDMI output.

No audio output.

Checkpoint 1 Check whether you have selected the correct digital output options in the Audio Output Options menu.

(See pages 32~33)

Checkpoint 1

Checkpoint 2

Checkpoint 3

Check the Video output is HDMI enabled.

Check the connection between the TV and the HDMI jack of the DVD Recorder.

See if your TV supports this 576p/720p/1080i DVD Recorder.

Abnormal HDMI output screen.

Timer Recording

Checkpoint 1

Timer lamp flickers.

Checkpoint 1 Check there is enough space in the disc for recording.

Checkpoint 2 Check whether the current disc is

recordable or not.

Make sure to check before the start time of recording.

If snow noise appears on the screen, it means that TV does not support HDCP (High-bandwidth Digital Content Protection).

Additional Information

English -89