Connecting to a PC
This PDP set is not compatible with Macintosh PC.
PC (15pin)
Cable
| Power Plug |
BNC | Audio Cable |
| |
Cable |
|
Connecting a PC to the PDP
1
2
Connect a PC (15pin) or BNC cable between the Video Output jack on the PC and the RGB1 (15p
•You can attach the Ferrite Cores to each jack of the BNC cable.
•For an explanation of Component video, see your PC owner’s instruction.
Connect a Audio cable between the Audio Output jack on the PC and the Audio Input (PC) on the PDP.
To watch the PC screen:
1.Turn on PDP and press the RGB button to select the PC mode.
2.Turn on PC and check for PC system requirements. (Refer to pages 46 and 47 for PC system requirements.)
3.Adjust the PC screen. (Refer to page 48.)
44