Samsung HPL5025 manual Setting the Multi Control

Page 61

Setting the Multi Control

Press the Menu button. Move the joystick up or

1 down to select the “SETUP”, then press the joystick to enter.

Move the joystick up or down to select the “Multi

2 Control”, then move the joystick left or right to enter.

SETUP

Language		English
Multi Control
Key Lock		Off
Move	Adjust	Exit

SETUP

Language		English
Multi Control
Key Lock		Off
Move	Adjust	Exit

Enter ID setup number. The ID Setup operates by

3 using only the joystick or channel up/down buttons.

Move the joystick up or down to select the “ID

4 Input”, The ID Input operates by using only the numeric buttons.

SETUP

ID Setup	0	1
ID Input	_	_
Move	Adjust	Exit

SETUP

ID Setup	0	1
ID Input	0	1
Move	Adjust	Exit

Enter ID Input and the screen with the set ID number

5 will be switched to the Menu screen.

Note

•To operate the multi control function, PDP1 and PDP2 should be set in the ID Setup mode. When entering the ID Input number of PDP1 while the PDP is set in the ID Input mode, only PDP1 is switched to the Menu screen and you can operate the remocon. At this time, PDP2 doesn't operate with the remocon and displays the standby mode of ID Input. (See the figure of step 4.)

61

Image 61

Contents Owner’s Instructions Page Thank You for Choosing Samsung Important Safety InformationPage User Instructions FCC InformationScreen Image retention User InstructionsCell Defect Atmospheric Pressure Condition 0.8~1.1 atmospheric pressureTable of Contents Page Setup Select , , Mute Your New Plasma Display PanelExternal Speaker Out jacks Power Input jack´ RGB Input 1 jack 15pin R/G/B, Y/Pb/PrRemote Control Buttons VCR control buttons Remote Control Operation Range˜ SET button ¯ Clock set buttonWall attachment panel Installation NotesInstalling the Display on the Wall Attachment Panel Page Separating the Display from the Wall Attachment Panel Viewing the Menus and Displays Turning the MonitorPDP On and OffViewing the Menus Displaying Clock Displaying Status InformationPage Connection How to Connect Connecting SpeakersVideotape Playback Connecting a VCR/Cable BoxTo Watch DTV To Play DVDPicture Control Customizing the Picture Using Automatic Picture Settings Selecting the PIP Screen Viewing the Picture-in-PictureSelecting an External Signal Changing the Location of the PIP Image Changing the Screen Size When entering the Video modeStill Freezing the PictureSound Control Customizing the Sound Using Automatic Sound Settings Using the Surround Time Setting Setting the Clock Setting the Sleep Timer Setting the On/Off Timer Setting the TimersOff time Page Connecting PC and Operation To watch the PC screen Connecting to a PCSetting up Your Monitor Plug and Play Pin ConfigurationHow to Set up Your Display Setting Windows only Video signal Dot X Line Vertical Horizontal Adjusting the R.G.B Adjusting the PC ScreenChanging the Position of the Image Changing the Size of the Image Enlarge of the Image Zoom Move Expanded Picture Picture Automatic Adjustment On/Off Picture Quality AdjustmentFrequency Adjustment Fine Tuning Phase Information Power Saver PC mode only Page Function Description Selecting a Menu Language Setting the Multi Control Using the Key Lock Setting up Your Remote Control Remote Control Codes Appendix Problem TroubleshootingIdentifying Problems Care and MaintenanceTemperature LiquidsVideo input SpecificationsMemo Memo Memo BN68-00263B-01ENG

Related manuals

Manual 36 pages 53.44 Kb