Samsung HPL5025 manual Installing the Display on the Wall Attachment Panel

Page 15

Installing the Display on the Wall Attachment Panel

See the drawing of the wall attachment panel shown in page 14 to check for

1 the stability of the wall where the PDP is to be installed. If the wall is not enough strong to support the PDP, strengthen the wall before installation.

Fix the wall attachment panel on the wall using bolts as shown in the following

2 figure: Fixing bolts must protrude from the wall appox. 0.6 inches.

Using the wall attachment panel, you may adjust the angle of the display from

3 0 to 20 degrees. The angle can be set in 5 stages with 5 degrees of distance each using the angle control holes on the sides of the panel.

When the angle has been set to 5 degrees.

Angle control holes

When the angle has been set to 15 degrees.

When the panel hasn't been tilted.

5degrees of tilt

10degrees of tilt

15degrees of tilt

No tilt 20 degrees of tilt

Continued...

15

Image 15

Contents Owner’s Instructions Page Thank You for Choosing Samsung Important Safety InformationPage User Instructions FCC InformationAtmospheric Pressure Condition 0.8~1.1 atmospheric pressure User InstructionsScreen Image retention Cell DefectTable of Contents Page Setup Select , , Mute Your New Plasma Display PanelR/G/B, Y/Pb/Pr Power Input jackExternal Speaker Out jacks ´ RGB Input 1 jack 15pinRemote Control Buttons ¯ Clock set button Remote Control Operation RangeVCR control buttons ˜ SET buttonWall attachment panel Installation NotesInstalling the Display on the Wall Attachment Panel Page Separating the Display from the Wall Attachment Panel Turning the MonitorPDP On and Off Viewing the Menus and DisplaysViewing the Menus Displaying Clock Displaying Status InformationPage Connection How to Connect Connecting SpeakersVideotape Playback Connecting a VCR/Cable BoxTo Watch DTV To Play DVDPicture Control Customizing the Picture Using Automatic Picture Settings Selecting the PIP Screen Viewing the Picture-in-PictureSelecting an External Signal Changing the Location of the PIP Image Changing the Screen Size When entering the Video modeStill Freezing the PictureSound Control Customizing the Sound Using Automatic Sound Settings Using the Surround Time Setting Setting the Clock Setting the Sleep Timer Setting the On/Off Timer Setting the TimersOff time Page Connecting PC and Operation To watch the PC screen Connecting to a PCSetting up Your Monitor Plug and Play Pin ConfigurationHow to Set up Your Display Setting Windows only Video signal Dot X Line Vertical Horizontal Adjusting the R.G.B Adjusting the PC ScreenChanging the Position of the Image Changing the Size of the Image Enlarge of the Image Zoom Move Expanded Picture Picture Automatic Adjustment On/Off Picture Quality AdjustmentFrequency Adjustment Fine Tuning Phase Information Power Saver PC mode only Page Function Description Selecting a Menu Language Setting the Multi Control Using the Key Lock Setting up Your Remote Control Remote Control Codes Appendix Problem TroubleshootingLiquids Care and MaintenanceIdentifying Problems TemperatureVideo input SpecificationsMemo Memo Memo BN68-00263B-01ENG

Related manuals

Manual 36 pages 53.44 Kb