Troubleshooting
Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money.
Problem | Possible Solution |
Poor picture. | Check all wire connections. |
The power indicator is amber blinking.
The monitor is using its power management system. Check the power management utility on your computer.
Your Remote control does not operate the monitor.
Press the “Mode” button to put your remote control in the “Monitor” mode.
The monitor won’t turn on. | Make sure the wall outlet is working. |
There is no screen image.
Check to see that both the monitor and the source are plugged in and turned on.
The image is too light or too dark.
Adjust the Brightness or Contrast settings.
The image is too large or | Adjust the Size settings. |
too small. |
|
Only the message "Check Temp" blinks on the screen and then the picture switches OFF.
The PDP is overheated. Power off the PDP and cool it for a while.
Only the message "Check Fan blinks on the screen and then the picture switches OFF.
The cooling fan of the PDP may have a problem. Contact an authorized service center.
66