Advanced Features
Setup
Using the Setup Menu
■■ Slide Show speed: Select to control the slide show speed. You can select Fast, Normal or Slow.
■■ Background Music: Select to determine whether to play an MP3 file during a slide show. You can select Music On or Music Off.
■■ Background Music Setting: While a slide show is in progress, use the Background Music Setting to select a music file to listen to. Select an MP3 file as the background music.
■■ Repeat Music: Select to determine whether to repeat playing the music when all MP3 files in the current folder have been played.
Setup | Slide show Speed | : Fast |
| Background Music | : On |
| Background Music Setting |
|
| Repeat Music | : On |
| Screen Saver | : 10 min |
| Safe Remove |
|
|
|
|
| U Move | E Enter R Return |
■■ Screen Saver: Select to set the waiting time before the screen saver appears. The screensaver will appear when no button is pressed for 10 min, 20 min, 40 min, 1 hour or Off.
■■ Safe Remove: You can remove the device safely from the TV.
Playing the selected photos / music files
1.Press the Yellow button.
2.Repeat the above operation to select desired photos / music files.
✎✎ Selected photos or files are marked with the symbol c. To cancel a selection, press the Yellow button again.
3.Press the �(Play) / ENTEREbutton to play the selected photos or files.
Anynet+
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
TV | Anynet+ Device 1 | Home Theater | Anynet+ Device |
| 2, 3 | ||
|
|
| |
| HDMI IN 3 |
|
|
| HDMI Cable (Not Supplied) |
| HDMI Cable (Not Supplied) |
| HDMI Cable (Not Supplied) |
|
|
| Optical Cable (Not Supplied) |
|
|
1.Connect the HDMI IN (1(DVI), 2, 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
2.Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.