Samsung PN42B450B1D, BN68-01920A-00 Connecting to a Cable Box that Descrambles Some Channels, Ant

❑Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

1.Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

N This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2.Connect this cable to a two-way splitter.

3.Connect an Antenna cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.

4.Connect an Antenna cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5.Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

ANT IN

	Incoming
	cable	Splitter
Incoming
cable	Splitter
			Cable Box
Incoming
cable	Splitter		RF (A/B)
		Cable Box	Switch

Incoming
cable	Splitter
		RF (A/B)
	Cable Box	Switch

6.Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

		TV Rear
Incoming		ANT IN
cable	Splitter
		RF (A/B)
		Switch

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 10