Samsung BN68-02140A-00, PN50B50SF Operation, Turning the TV On and Off, Changing Channels

Operation

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

NIt may take a while for your TV to power on.

Changing Channels

❑Using the Channel Buttons

Press the CH or CH button to change channels.

NWhen you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 20 to memorize channels.

❑Using the Number Buttons

Press the number buttons to go directly to a channel. For example, to select channel “27”, press “2”, then “7”.

NFor quick channel change, press the number buttons, then press the ENTERE button.

❑Using the “” Button

The “” button is used to select stations that broadcast a digital signal.

1.For example, for Channel "7-1", press "7", then "”, then "1".

NHD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.

NFor quick channel change, press the number buttons, then press the ENTERE button.

❑Using the PRE-CH Button to select the Previous Channel

1.Press the PRE-CHbutton. The TV will switch to the last channel viewed.

NTo quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CHbutton to quickly alternate between them.

VOL CH

VOL CH

VOL CH

Adjusting the Volume

❑Using the Volume Buttons

1. Press the VOL or VOL button to increase or decrease the volume.

❑Using the MUTE Button

At any time, you can cut off the sound using the MUTE button.

1.Press MUTE button and the sound cuts off. The will displayed on the screen.

2. To turn mute off, press the MUTE button again, or simply press the VOL		or
VOL	button.

VOL CH

VOL

English - 16