Samsung 570VTFT manual Self-Test Feature Check Stfc, Version 4.00.950A, Version 4.00.950B

Setting up Your Monitor

1	Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
	ADVANCED, MONITOR tab, CHANGE. This will start the “Add New Hardware

	Wizard”.
2	Follow the same directions as given in the steps in the section above.

Windows® 95

To determine the version of Windows® 95 that your computer uses, right click on the “My Computer” icon on the Windows desktop and select “Properties”. The version number can be seen on the “General” section under “System:”. Follow the directions given below according to the version of your Windows® 95 operating system:

Version 4.00.950A

1	Click on START, SETTINGS, CONTROL PANEL, DISPLAY SETTINGS tab,
	CHANGE DISPLAY TYPE, CHANGE, HAVE DISK.
2	Type the diskette (or CD) letter in the box and click OK.
Version 4.00.950B
1	Click on START, SETTINGS, CONTROL PANEL, DISPLAY, ADVANCED
	PROPERTIES, MONITOR tab, HAVE DISK.
2	Type the diskette (or CD) letter in the box and click OK.

Self-Test Feature Check (STFC)

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark and the power indicator is blinking, run the monitor self-test by performing the following steps:

1

2

3

Turn off both your computer and the monitor.

Unplug the video cable from the back of the computer.

Turn on the monitor.

English 8