Samsung 570VTFT manual Plug and Play, Installing the Video Driver, Windows

Setting up Your Monitor

Table 1. Connector locations for multimedia bases (Continued )

Item	Name	Description
E	AUDIO IN jack	Connect a cable here to bring sound from your
		computer’s sound card.
F	External	Connect an external microphone here. Using an
		external microphone automatically disconnects
	microphone jack
		the monitor’s internal microphone.
G	Headphone jack	Connect headphones here. Connecting
		headphones automatically turns the speakers
		off.

Plug and Play

Our adoption of the new VESA® Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the LCD. If your PC system needs a video driver, following the instructions given below according to the operating system your computer uses.

Installing the Video Driver

When prompted by the operating system for the monitor driver, insert the Driver diskette (or CD) included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have.

Windows® 98

1	Windows® 98 will auto-detect your new monitor and start the “Add New Hardware
	Wizard” if the drivers are not already installed. Click the NEXT button to search for
	drivers.
2	Check the diskette (or CD-ROM) drive box to install the drivers off the diskette (or CD)
	provided with your LCD monitor and click NEXT.
3	Confirm that Windows found the driver on the diskette (or CD) and click NEXT again
	to install the driver.

To manually install or update the driver, follow the directions below:

English 7