¦Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1.Press the POWERPbutton on the remote control.
N The screen is turned off and a red standby indicator appears on your set.
2.To switch your set back on, simply press the POWERPbutton again.
N Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug the set from the mains and aerial.
¦Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the POWERPbutton on the remote control.
NYou can also use the POWERPbutton on the TV.
2.Press the ▲ or ▼ button to select the language, then press the ENTEREbutton.
3.Press the ◄ or ► button to select Store Demo or Home Use, then the ENTEREbutton.
NWe recommend setting the TV to Home Use mode for the best picture in your home environment.
NStore Demo mode is only intended for use in retail environments.
NIf the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4.The message Check antenna input. is displayed with OK selected. Press the ENTEREbutton.
NPlease check that the antenna cable is connected correctly.
5.Select the appropriate area by pressing the▲ or ▼ button.
Press the ENTEREbutton to confirm your choice.
6.The Auto Store menu is displayed with the Start selected. Press the ENTEREbutton.
NThe channel search will start and end automatically.
NPress the ENTEREbutton at any time to interrupt the memorization process.
NAfter all the available channels are stored, the Clock Set menu appears.
7.Press the ENTEREbutton.
Select the Month, Day, Year, Hour, Minute, or am/pm by pressing the ◄ or ► button. Set the Month, Day, Year, Hour, Minute, or am/pm by pressing the ▲ or ▼ button.
NYou can also set the Month, Day, Year, Hour and Minute by pressing the number buttons on the remote control.
8.Press the ENTEREbutton to confirm your setting. The message Enjoy your TV. is displayed. When you have finished, press the ENTEREbutton.
NEven if the ENTEREbutton is not pressed, the message will automatically disappear after several seconds.
If you want to reset this feature...
1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTEREbutton.
2.Press the ENTEREbutton again to select Plug & Play.
N The Plug & Play feature is only available in the TV mode.
TV | Setup |
|
Plug & Play |
| |
Language | : English | |
Time |
| |
Child Lock | : On | |
Change PIN |
|
|
Game Mode | : Off | |
Melody | : Off | |
Energy Saving | : Off | |
PIP |
| |
UMove | EEnter | RReturn |
English -