Samsung BN68-01983A-00 user manual Anti-Theft Kensington Lock, Securing the TV to the Wall

Page 30

¦Anti-Theft Kensington Lock

The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer.

Refer to the manual provided with the Kensington Lock for proper use.

NThe locking device has to be purchased separately.

NThe location of the Kensington Lock may be different depending on its model.

1.Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the locking direction (2).

2.Connect the Kensington Lock cable (3).

3.Fix the Kensington Lock to a desk or a heavy stationary object.

3

2

1

¦Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

To avoid the TV from falling:

1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

N You may need additional material such as an anchor depending on the type of wall.

N Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

Wall

2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

N Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

N Screw Specifications

• For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15

3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.

N Install the TV near to the wall so that it does not fall backwards.

NIt is safe to connect the string so that the clamps fixed on the wall are equal to or

lower than the clamps fixed on the TV.

 

Wall

N Untie the string before moving the TV.

 

 

 

4. Verify all connections are properly secured. Periodically check connections for any

 

 

 

 

sign of fatigue for failure. If you have any doubt about the security of your connections,

 

 

 

contact a professional installer.

 

 

English - 28

Image 30
Contents Serial No Contact Samsung WorldwidePrecautions When Displaying a Still Image LicenseContents Setting UP Your TV Viewing the Control PanelAccessories Product colour and shape may vary depending on the model Viewing the Connection Panel3 4 Hdmi in 1DVI, 2Connector for service only Connector for software upgrades, etcAV in 1, 2 Video / R-AUDIO-L Dual Sound effect selection Viewing the Remote ControlNumeric Buttons Press to change the channel Teletext FunctionsViewing the menus Installing Batteries in the Remote ControlOperation Operation the OSD On Screen DisplayIf you want to reset this feature Placing Your Television in Standby ModePlug & Play Feature SetupChannel Channel MenuFine Tune SortName EnglishConfiguring the Picture Menu PictureMode Advanced Settings Picture Reset → OK / Cancel Picture OptionsViewing Picture-in-Picture Display Modes Using Your TV as a Computer PC DisplaySetting Up Your PC Software Based on Windows XP Sub and HDMI/DVI InputSetting up the TV with your PC Configuring the Sound MenuSound Speaker Select Selecting the Sound ModeAuto Volume → Off / On Sound Select → Main / SubSetup Child Lock → Off / OnMelody → Off / Low / Medium / High Game Mode → Off / OnChange PIN Energy Saving → Off / Low / Medium / High / AutoSource List InputInput Menu Edit NameANYNET+ Connecting Anynet+ DevicesWhat is Anynet+? To connect to a TVSetup Setting Up Anynet+Switching between Anynet+ Devices Anynet+ MenuTV Remote Control Buttons Available in Anynet+ Mode RecordingDevice Type Operating Status Available Buttons Troubleshooting for Anynet+ Problem Possible SolutionHDMI-CEC is set to On in the Anynet+ Setup menu Teletext Feature Recommendations 8store Used to store the Teletext pages 4size Part Installing the StandTeletext pages are organized according to six categories Selected page numberDisconnecting the Stand Installing the Wall Mount KitSecuring the TV to the Wall Contact a professional installerAnti-Theft Kensington Lock To avoid the TV from fallingTroubleshooting Before Contacting Service Personnel ProblemSpecifications