PICTURE
¦Configuring the Picture Menu
❑Mode
You can select the type of picture which best corresponds to your viewing requirements.
TPress the TOOLS button to display the Tools menu. You can also set the picture mode by selecting Tools → Picture Mode.
N The Picture mode must be adjusted separately for each input source.
■Dynamic
Selects the picture for increased definition in a bright room.
■Standard
TV |
| Picture |
|
Mode |
| : Dynamic | |
Backlight |
|
| 0 |
Contrast |
|
| 00 |
Brightness |
|
| |
Sharpness |
|
| |
Colour |
|
| |
Tint (G/R) | G 50 |
| R 50 |
Advanced Settings |
| | |
Picture Options |
| | |
Reset |
| : OK | |
UMove | EEnter | RReturn | |
Selects the picture for the optimum display in a normal environment.
■Movie
Selects the picture for viewing movies in a dark room.
❑Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
■Backlight
Adjusts the brightness of LCD back light.
■Contrast
Adjusts the contrast level of the picture.
■Brightness
Adjusts the brightness level of the picture
■Sharpness
Adjusts the edge definition of the picture.
■Colour
Adjusts colour saturation of the picture.
■Tint (G/R)
▲
Backlight 
10
▼
UMove LAdjust RReturn
Adjusts the colour tint of the picture.
NIn TV, AV1, AV2 modes of the PAL system, you cannot use the Tint (G/R) Function.
NWhen you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted accordingly.
NIn PC mode, you can only make changes to Backlight, Contrast and Brightness.
NSettings can be adjusted and stored for each external device you have connected to an input of the TV.
NThe energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will reduce the overall running cost.