Mechanical Layout 400TSn, AV / Hdmi / TV P.MODE

Introduction

24.Up-Down Left-Right but-

tons

25. EXIT

26. SRS 27.MagicInfo 28. P.MODE

Moves from one menu item to another horizontally, vertically or adjusts selected menu values.

Exits from the menu screen.

Selects SRS TruSurround XT mode.

MagicInfo Quick Launch Button.

When you press this button, current picture mode is displayed on the lower center of the screen.

AV / HDMI / TV : P.MODE

The LCD Display has four automatic picture settings that are pre- set at the factory. Then push button again to circle through avail- able preconfigured modes. ( Dynamic → Standard → Movie

→Custom )

PC / DVI / MagicInfo: M/B (MagicBright)

MagicBright is a feature providing the optimum viewing envi- ronment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. (Entertain → Internet → Text → Custom )

29. DUAL/MTS

DUAL-

STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV.

	MTS-
	You can select MTS (Multichannel Television Stereo) mode.
		Audio Type	MTS/S_Mode	Default
	FM Stereo	Mono	Mono	Manual Change
		Stereo	Mono ↔ Stereo
		SAP	Mono ↔ SAP	Mono
30. PIP	Every time you press the button, a PIP screen appears.
	- This fuction does not work for this LCD Display.
31.SWAP	Swaps the contents of the PIP and main image. The image in the
	PIP window will appear on the main screen, and the main screen
	image will appear in the PIP window.

- This fuction does not work for this LCD Display.