Samsung WD1450, VT2570, WD1950, WD4050, WD4550 user manual Picture Reset, Auto Adjustment, Screen

24

English Using the Menus

	Picture
Option	Description
Picture Reset	Resets all picture settings to the default values.
	■ Reset Picture Mode: Current picture values return to
	default settings.

	Picture (In the PC mode)
Option	Description
Auto Adjustment	Use the Auto Adjust function to have the TV set
	automatically adjust the video signals it receives.
	The function also automatically fine-tunes the settings and
	adjusts the frequency values and positions.
Screen	■ Coarse / Fine
	The purpose of picture quality adjustment is to remove or
	reduce picture noise. If the noise is not removed by Fine-
	tuning alone, then adjust the frequency as best as possible
	(Coarse) and Fine-tune again. After the noise has been
	reduced, readjust the picture so that it is aligned on the
	centre of screen.
	■ PC Position
	Adjust the PC’s screen positioning if it does not fit the TV
	screen.
	Press the ▲ or ▼ button to adjusting the Vertical-Position.
	Press the ◄ or ► button to adjust the Horizontal-Position.
	■ Image Reset
	You can replace all image settings with the factory default
	values.

	Brightness:	45
Picture	Sharpness	: 50
	Auto Adjustment	►

Screen

Advanced Settings

Picture Options

Picture Reset

■Preset: Press the SOURCE button to select PC mode.

■This function does not work in DVI-HDMI mode.

■Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto

Adjustment.