36
English Anynet+
Troubleshooting for Anynet+
Problem | Possible Solution |
|
|
Anynet+ does not work. | ● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. |
| ● Connect only one receiver (home theatre). |
| ● Check if the Anynet+ device power cord is properly connected. |
| ● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. |
| ● Check whether Anynet+ |
| ● Check whether the TV remote control is in TV mode. |
| ● Check whether it is Anynet+ exclusive remote control. |
| ● Anynet+ doesn’t work in certain situations. (Searching channels, Operating Plug & Play, etc.) |
| ● When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or |
| turn your TV off and on again. |
| ● Check if the Anynet+ Function of Anynet+ device is set on. |
|
|
I want to start Anynet+. | ● Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI- |
| CEC) is set to On in the Anynet+ Setup menu. |
| ● Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to |
| show the Anynet+ menu and select a menu you want. |
|
|
I want to exit Anynet+. | ● Select View TV in the Anynet+ menu. |
| ● Press the SOURCE button on the TV remote control and select a device other than Anynet+ |
| devices. |
| ● Press P >/<to change the TV mode. (Note that the channel button operates only when a |
|
|
|
|
The message ‘Connecting to | ● You cannot use the remote control when you are configuring Anynet+ or switching to a view |
Anynet+ device...’ appears on | mode. |
the screen. | ● Use the remote control when the Anynet+ setting or switching to view mode is complete. |
|
|
The Anynet+ device does not | ● You cannot use the play function when Plug & Play is in progress. |
play. |
|
|
|
The connected device is not | ● Check whether or not the device supports Anynet+ functions. |
displayed. | ● Check whether or not the HDMI 1.3 cable is properly connected. |
| ● Check whether Anynet+ |
| ● Search Anynet+ devices again. |
| ● You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not |
| support Anynet+ functions. |
| ● If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord |
| or a power failure, please repeat the device scan. |
|
|
The TV programme cannot be | ● Check whether the antenna jack on the recording device is properly connected. |
recorded. |
|
|
|
The TV sound is not output | ● Connect the optical cable between TV and the receiver. |
through the receiver. |
|
|
|