Samsung WD4050, VT2570, WD1950 Securing the TV to the Wall, Untie the string before moving the TV

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

		To avoid the TV from falling:
1	Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
	screws have been firmly installed onto the wall.
	■ You may need additional material such as an anchor depending on the type of
		wall.	Wall
	■ Since the necessary clamps, screws, and string are not supplied, please
		purchase these additionally.
2	Remove the screws from the centre back of the TV, put the screws into the clamps,
	and then fasten the screws onto the TV again.
	■ Screws may not be supplied with the product. In this case, please purchase the
		screws of the following specifications.
	■	Screw Specifications:
		• For a 32 ~ 40 Inch LCD TV: M6 X 15
3	Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
	string and then tie the string tightly.
	■ Install the TV near to the wall so that it does not fall backwards.
	■ It is safe to connect the string so that the clamps fixed on the wall are equal to or
		lower than the clamps fixed on the TV.	Wall
	■	Untie the string before moving the TV.
4	Verify all connections are properly secured. Periodically check connections for any
	sign of fatigue for failure. If you have any doubt about the security of your connections,

contact a professional installer.



English Getting Started