4 | Software Upgrade: |
Update the software |
to the latest version
✎✎ To update later,
select Skip.
5 | Terms of Service |
Agreement |
6 | Auto Program (1): |
Select where your |
TV signal comes from.
7 | Auto Program (2): |
Select the search |
options.
When Network Settings is complete, your TV will check for a new software version automatically. If new software is available, the TV downloads and installs the new software. When the download is complete, select Next.
✎✎ If you want to upgrade later, select Skip. For more information, refer to Software Update (Preference Features → Support Menu) in the
✎✎ This may take some time, depending on your network status.
✎✎ You can only upgrade software if your TV has an active network connection.
✎✎ If no new update software is available, a no new updates message appears on the screen. Select OK.
The Terms of Service Agreement screen appears.
✎✎ The screen can take a few seconds to display.
The General Disclaimer screen appears. Select Agree. The Privacy Policy screen appears. Select Agree.
✎✎ To use Smart Hub, you must select Agree for the Terms of Service Agreement.
Select the appropriate option for your TV using your remote, and then select Next.
•• I use an antenna cable connection to the TV.: Select if you have an antenna or a cable connection without a
•• I use a
1.Select Air or Cable using your remote. A check appears on your selection. When done, select Next. You can check both if you have both connected.
2.If you selected Air, go to 8 - Auto Program (3).
3.If you selected Cable, you’ll go to the cable system screen. Select Digital Cable System. The option window appears. Select the correct cable signal format; STD, HRC, or IRC. Most cable systems use STD (Standard). Repeat the same process with Analog Cable System.
4.When done, select Next.