■■ Voice Control Environment Test
You can test the amount of ambient noise level detected by the TV microphone.
−− Noise Test: This test checks the amount of ambient noise detected by the TV microphone. Too much ambient noise will prevent Voice Command from functioning. To run, select Next using your remote. The test starts and takes a few seconds. Please keep as quiet as possible during the test.
−− Mic & Speaker Test: Determines if the sound from the TV speakers picked up by the TV microphone will disrupt Voice Command. To run, select Start using your remote. The test starts and takes a few seconds. Please keep as quiet as possible during the test.
✎✎ Available only when Speaker Select is set to TV Speaker.
−− Voice Control Test: This test checks the volume level and clarity of your voice for use with Voice Control. Select Start using your remote. After the test starts, say the test words listed in the instructions as loudly and clearly as you can.
✎✎ If the test is not successful, select Retest, and then say the words loudly and clearly again.
To use the Voice Control function, follow these steps:
✎✎ If Voice Control function is set to On, the TV may be turned on automatically by effect of the ambient environment.
1.Speak the Trigger Words that you selected into the microphone embedded in the TV or press the VOICE˜ button on your remote. The TV displays the Voice Command Bar Size.
✎✎ When you use the Voice Control, the volume is set to 5 automatically.
2.Say a word or phrase listed in the Voice Command Bar Size.
✎✎ Pronounce the word or phrase clearly and correctly in the language you selected in Language.
3.Wait until recognition is complete, and then say the next command in the same fashion
✎✎ To exit the Voice Control mode, speak the Trigger Words or "Cancel" using the TV's microphone, or press the RETURNR button.
Using the Voice Text Input Mode
1.Say "Search All" while in the Voice Control mode.
✎✎ When you use a QWERTY keypad screen, you can use the Voice Text Input Mode. Say the Trigger Words that you selected into the microphone embedded in the TV or press the VOICE˜ button on your remote. You cannot use it for some UIs such as URL input boxes.
2.Say the word or phrase you wish to search for.
3.The TV executes the spoken function.
✎✎ Voice Control performance levels will vary based on the language spoken.