8 | Auto Program (3): |
Channel |
memorization
Channel memorization stars. Channel memorization can take up to 45 minutes, depending on your cable system.
For more information, refer to Auto Program (Channel Menu → Memorizing Channels) in the
✎✎ Select Stop at any time to halt the memorization process.
9 | Clock: Set the Clock | Select Auto or Manual, and then select Next. |
|
| ✎✎ If you selected I use a |
|
| only set the current time and date manually, using your remote. |
|
| Auto |
|
| If you selected Auto, the TV will automatically download the correct time |
|
| from a digital channel. The Time Zone screen will appear. Select your |
|
| Time Zone, and then select Next. The DST (Daylight Savings Time) |
|
| screen will appear. The DST function sets the time ahead one hour to |
|
| adjust the clock for Daylight Savings Time. Select On if you want to turn |
|
| the DST adjustment on. Select Off to turn off the DST adjustment. You |
|
| can also turn the DST function on through the TV's on screen menu |
|
| (Menu → System → Time → Clock → DST). |
|
| Manual |
|
| If you selected Manual, you’ll go to the Clock screen. Select Date or |
|
| Time. You can set the current date and time using your remote. When |
|
| done setting the Date and Time, select Next. |
10 | Voice and Motion | You can turn the Voice and Motion Control function on or off. Select Off |
Control: Setting the | or On, and then select Next. | |
| Voice and Motion |
|
| Control function. |
|
11 Setup Complete | Review the Setup data, and then select Close to finish. | |
|
| ✎✎ The completed settings are displayed. |
If You Want to Rerun Setup...
Menu → System → Setup
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. See page 12 for information about the Controller.