Samsung LTN1535 manual Connecting to a Cable Box that Descrambles All Channels

Page 14

01-12_EN 11/14/03 9:55 PM Page 8

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the

ANTENNA OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply, “OUT”.

2

Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN”, or simply, “IN”.

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

English-8

Image 14

Contents LTN1535 LTN1735 LTP2035 Safety Instructions Safety+ContentsEN 11/26/03 805 PM FCC Information Your New TV InstallationSpecial Features OperationTroubleshooting AppendixList of Features List of PartsVOL + Familiarizing Yourself with Your New TVTop Buttons Rear Panel Jacks CH and CH Channel Up/Down Remote Control+100 VOL+ and VOLInstalling Batteries in the Remote Control Remote control doesn’t workConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsEnglish-9 Connecting a VCR Connecting an S-VHS VCR Connecting a DVD Player ComponentTurning the TV On and Off Using the Channel ButtonsUsing the PRE-CH Button to select the Previous Channel Changing ChannelsViewing the Display Adjusting the VolumeUsing Mute Plug & Play Feature UP/DOWN buttons to select Air, then pressUP/DOWN buttons to select Selecting the Video Signal-sourceMemorizing the Channels To select channels over Storing Channels in Memory Automatic MethodTo check the channels stored in memory 2Alternate method To Select TV/InputADD and DEL Channels Manual Method To Edit the Input Source Name UP/DOWN buttons to select Edit Name, thenUsing Automatic Picture Settings Alternate methodCustomizing the Picture Using Automatic Sound Settings UP/DOWN buttons repeatedly to select the StandardSelecting a Menu Language UP/DOWN buttons to select LanguageSetting the Blue Screen Mode Fine Tuning Channels Changing the Screen Size Freezing the PictureAdjusting the Color Tone UP/DOWN buttons to select Color ToneTo select the Sound option UP/DOWN buttons to select MTS, then press the Enter buttonUP/DOWN buttons repeatedly until the correct hour appears Setting the ClockUP/DOWN buttons three times Setting the On/Off Timer Auto Power Off UP/DOWN buttons to select Off TimeSetting the Sleep Timer Setting the On/Off Timer Using the MenuUP/DOWN buttons to select Change Pin Using the V-ChipSetting Up Your Personal ID Number Pin UP/DOWN buttons to select On. Pressing How to Enable/Disable the V-ChipHow to Set up Restrictions Using the TV guidelines TV-Y UP/DOWN buttons to select Setup, then press NC-17No children under age Adults only NR Not rated Identifying Problems Chapter FiveUnplug the monitor from the power outlet before cleaning Attaching a Wall or Arm mounting deviceRear cover Installing Vesa compliant mounting devicesMounting pad Using the Anti-Theft Kensington Lock Retractable StandCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications Model LTN1535 LTN1735 LTP2035