Samsung LTN1535 manual English-9

01-12_EN 11/14/03 9:55 PM Page 9

I N S TA L L AT I O N

4

Connect a coaxial cable between the

ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch.

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels.

(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English-9