Samsung LTN1535 manual Connecting a VCR

Page 16

01-12_EN 11/14/03 9:55 PM Page 10

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-8).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the

ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

# Each external input source device has a different back panel configuration.

English-10

Image 16

Contents LTN1535 LTN1735 LTP2035 Safety Instructions Safety+ContentsEN 11/26/03 805 PM FCC Information Installation Special FeaturesYour New TV OperationTroubleshooting AppendixList of Features List of PartsTop Buttons Familiarizing Yourself with Your New TVVOL + Rear Panel Jacks Remote Control +100CH and CH Channel Up/Down VOL+ and VOLInstalling Batteries in the Remote Control Remote control doesn’t workConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsEnglish-9 Connecting a VCR Connecting an S-VHS VCR Connecting a DVD Player ComponentUsing the Channel Buttons Using the PRE-CH Button to select the Previous ChannelTurning the TV On and Off Changing ChannelsUsing Mute Adjusting the VolumeViewing the Display Plug & Play Feature UP/DOWN buttons to select Air, then pressMemorizing the Channels Selecting the Video Signal-sourceUP/DOWN buttons to select To check the channels stored in memory Storing Channels in Memory Automatic MethodTo select channels over ADD and DEL Channels Manual Method To Select TV/Input2Alternate method To Edit the Input Source Name UP/DOWN buttons to select Edit Name, thenUsing Automatic Picture Settings Alternate methodCustomizing the Picture Using Automatic Sound Settings UP/DOWN buttons repeatedly to select the StandardSelecting a Menu Language UP/DOWN buttons to select LanguageSetting the Blue Screen Mode Fine Tuning Channels Changing the Screen Size Freezing the PictureAdjusting the Color Tone UP/DOWN buttons to select Color ToneTo select the Sound option UP/DOWN buttons to select MTS, then press the Enter buttonUP/DOWN buttons three times Setting the ClockUP/DOWN buttons repeatedly until the correct hour appears Setting the On/Off Timer Auto Power Off UP/DOWN buttons to select Off TimeSetting the Sleep Timer Setting the On/Off Timer Using the MenuSetting Up Your Personal ID Number Pin Using the V-ChipUP/DOWN buttons to select Change Pin How to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-ChipUP/DOWN buttons to select On. Pressing TV-Y UP/DOWN buttons to select Setup, then press NC-17No children under age Adults only NR Not rated Identifying Problems Chapter FiveUnplug the monitor from the power outlet before cleaning Attaching a Wall or Arm mounting deviceMounting pad Installing Vesa compliant mounting devicesRear cover Using the Anti-Theft Kensington Lock Retractable StandCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications Model LTN1535 LTN1735 LTP2035