Samsung LT-P326W manual Connecting a VCR

Page 15

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 7-10).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANT IN terminal

on the back of the VCR.

3

Connect a coaxial cable between the ANT OUT terminal on the VCR and the antenna terminal on the TV.

AV OUT

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

AV OUT

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

AV OUT

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

* Each external input source device has a different back panel configuration.

English-12

Image 15

Contents LT-P326W Operation InstallationSpecial Features Your New TVTroubleshooting PC DisplayAppendix List of Parts List of FeaturesFamiliarizing Yourself with Your New TV Right-Side Panel Buttons+ VOL Hdmi Rear Panel JacksUP / Down / Left Remote ControlCH and CH Channel UP/Down VOL + and VOL+100 AnynetVCR/DVD Functions If remote control doesn’t work Installing Batteries in the Remote ControlAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF Antennas Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsEnglish-10 Connecting Hdmi How to connect CoreHdmi allows multiple Connecting a VCR Connecting a DVI-D Cable Connecting an S-VHS VCRConnecting a Digital TV Set-Top Box Connecting a DVD PlayerTV Rear panel Connecting a PCAnynet What is the Anynet?Anynet Connecting TV + DVD/VCR Combo Connecting AV Signal Cables Connecting TV + DVD Receiver Connecting AV Signal Cables English-20 Adjusting the Volume Turning the TV On and OffChanging Channels Viewing the Menus Viewing the DisplaySetting Up the Remote to Operate Your VCR Setting Up Your Remote ControlSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your DVD Remote Control Codes Chapter Fo ur Plug & Play FeatureMemorizing the Channels Selecting the Video Signal-sourceTo select channels over Storing Channels in Memory Automatic MethodLabeling Channels Adding and Erasing Channels Manual MethodAlternate method To Select Source To Set-up Your ChannelsTo Edit the Input Source Name Using Automatic Picture Settings Customizing the Picture Using Automatic Sound Settings UP/DOWN Customizing the SoundSelecting a Menu Language Setting the Blue Screen Mode Fine Tuning Channels LNA Low Noise Amplifier PIP Settings Viewing Picture-in-PictureActivating Picture-in-Picture Changing the Position of the PIP Window Selecting a Signal Source External A/V for PIPSwapping the Contents of the PIP and Main image Changing the PIP ChannelDNIe Digital Natural Image engine Easy Control MCC My Color ControlDetail Control Skin Tone Green Grass Blue Sky- ResetI2C Intelligent Image Control IBC Intelligent Brightness Control Freezing the Picture Changing the Screen SizeAdjusting the Color Tone Trademark & Label License Notice Setting the TruSurround Xtsrs TsxtReduces the differences in volume level among broadcasters Automatic Volume ControlChoosing a Multi-Channel Sound MTS Soundtrack Special Sound OptionsAdjusting the Headphone Sound Selecting the Main or Sub Sound Sub Woofer Setting the Clock Setting the On/Off Timer Auto Power Off Sleep timer Setting the Sleep TimerViewing Closed Captions English-61 Setting Up Your Personal ID Number PIN Using the V-ChipHow to Enable/Disable the V-Chip English-64 English-65 To select Mpaa rating, then press the Enter button Press the Enter button to select U or B UP/DOWN Color WeaknessSelecting the Melody How to Set up Your PC Software Windows only Using Your TV as a Computer PC DisplayHow to Auto Adjust LEFT/RIGHT Adjusting the Screen QualityChanging the Screen Position To Initialize the Screen Position or Color Settings Chapter Six Identifying ProblemsMove the computers mouse or press a key on the keyboard English-77 English-78 See if there are Anynet devices connected Make sure that the devices connected support the Anynet Glossary Content Maintenance of Your LCD TV Installing the StandParts Wall Mount Installation GuideInstallation Dimensions Using Your TV in Another Country Cleaning and Maintaining Your TVModel Name SpecificationsKHz Resolution FrequencyDisplay Modes Polarity