OP E R AT I O N
Adding and Erasing Channels (Manual Method)
1
Use the number buttons to directly select the channel to Add or Delete.
Press the MENU button to display the menu.
Press the UP/DOWN 
buttons to select “Channel”, then press the ENTER 
button.
Press the UP/DOWN 
buttons to select “Add/Delete”.
Press the ENTER 
button.
Press the ENTER 
to select “Add” or “Delete” (pressing ENTER 
toggles between the two).
Press the EXIT button to exit.
Alternate method:
Use the number buttons to directly select the channel that will be added or erased. Press the “ADD/DEL” button.
Repeatedly pressing ENTER 
will alternate between “Add”and“Delete”.
Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number buttons on the remote control.
Labeling Channels
1
Press the MENU button to display the menu.
Press the UP/DOWN 
buttons to select “Channel”, then press the ENTER 
button.
Press the UP/DOWN 
buttons to select “Name”, then press the ENTER 
button.
2
Press the UP/DOWN 
buttons to select a channel.
You can assign a name to a channel.
Press the LEFT/RIGHT 
buttons to move to “Labeling” and use
the UP/DOWN 
buttons to assign a name.
Repeat this procedure to enter up to four characters.
Press the EXIT button to exit.