Samsung LT-P326W manual Selecting a Signal Source External A/V for PIP, Changing the PIP Channel

OP E R AT I O N

Selecting a Signal Source (External A/V) for PIP

3

Press the UP/DOWN		T V			PIP
buttons to select “Source”,			PIP	:	On
			Source	:
then press the ENTER button.			Swap		TV
					AV
			Size	:	S-Video
			Position	:
Select a source of the sub					Component 1
			Ch.	:
					Component 2
picture by pressing the
UP/DOWN	buttons and		Move		Enter	Return

press the ENTER button.

Note :If Connector is not connected, Source cannot be selected except TV. (in both main and sub-screen)

Source selection is possible only when Component 1, Component 2, HDMI, DVI, or PC is connected.

Swapping the Contents of the PIP and Main image

4

Press the UP/DOWN buttons to select “Swap”, then press the ENTER button.

Changing the PIP Channel

5

Press the UP/DOWN buttons to select “Ch.(Channel)”, then press the ENTER button.

Changing the Position of the PIP Window

You can select the channel that you want to view through sub picture by pressing the

UP/DOWN buttons.

6

Press the UP/DOWN buttons to select “Position”, then press the ENTER button.

Changing the Size of the PIP Window

7

Press the UP/DOWN buttons to select “Size”, then press the ENTER button.

Press the EXIT button to exit.

•When the PC is in energy saving mode, you cannot choose the PIP option.

•You may notice that the picture in the PIP window becomes slightly unnatural when you set the main screen to game or karaoke mode.

•Switch the main screen and the PIP window for normal viewing.

English-42