Samsung LN52B530, LN46B530, LN40B530, LN32B530, LN37B530 user manual Troubleshooting for Anynet+

¦Troubleshooting for Anynet+

Problem	Possible Solution
Anynet+ does not work.	● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
	devices only.
	● Connect only one receiver (home theater).
	● Check if the Anynet+ device power cord is properly connected.
	● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
	● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
	● Check whether the TV remote control is in TV mode.
	● Check whether it is Anynet+ exclusive remote control.
	● Anynet+ doesn’t work in certain situations. (Searching channels, Operating, Plug & Play,
	etc.)
	● When connecting or removing the HDMI 1.3 cable, please make sure to search devices
	again or turn your TV off and on again.
	● Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.	● Check if the Anynet+ device is properly connected to the TV and check if the Anynet+
	(HDMI-CEC) is set to On in the Anynet+ Setup menu.
	● Press the TV button on the TV remote control to switch to TV. Then press the TOOLS
	button to show the Anynet+ menu and select a menu you want.
I want to exit Anynet+.	● Select View TV in the Anynet+ menu.
	● Press the SOURCE button on the TV remote control and select a device other than
	Anynet+ devices.
	● Press z, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note
	that the channel button operates only when a tuner-embedded Anynet+ device is not
	connected.)
The message Connecting to	● You cannot use the remote control when you are configuring Anynet+ or switching to a
Anynet+ device... appears on the	view mode.
screen.	● Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not	● You cannot use the play function when Plug & Play is in progress.
play.
The connected device is not	● Check whether or not the device supports Anynet+ functions.
displayed.	● Check whether or not the HDMI 1.3 cable is properly connected.
	● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
	● Search Anynet+ devices again.
	● You can connect an Anynet+ device using the HDMI 1.3 cable only. Some Some HDMI
	cables may not support Anynet+ functions.
	● If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
	power cord or a power failure, please repeat the device scan.
The TV program cannot be	● Check whether the antenna jack on the recording device is properly connected.
recorded.
The TV sound is not output	● Connect the optical cable between TV and the receiver.
through the receiver.

English - 39