Samsung LN46A950 setup guide Connecting a VCR

Page 5

Connecting a VCR

Video Connection

TV Side Panel

TV Rear Panel

 

Unplug the cable or antenna

1

from the back of the TV.

IN4

VCR Rear Panel

HDMI

 

3

RF Cable

(Not supplied)

5 Audio Cable (Not supplied)

4 Video Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

 

Connect the cable or antenna

2

to the ANT IN terminal on the

 

back of the VCR.

 

 

Connect an RF Cable between

3

the ANT OUT terminal on the

VCR and the ANT IN terminal

 

 

on the TV.

 

Connect a Video Cable

4

between the VIDEO OUT jack

on the VCR and the AV IN 1

 

 

[Y/VIDEO] or AV IN 2 [VIDEO]

 

jack on the TV.

 

Connect Audio Cables between

5

the AUDIO OUT jacks on the

VCR and the AV IN 1 (or AV IN 2)

 

[R-AUDIO-L] jacks on the TV.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

S-Video Connection

TV Rear Panel

VCR Rear Panel

3

Audio Cable

(Not supplied)

2

S-Video Cable

(Not supplied)

1

RF Cable

(Not supplied)

 

To begin, follow steps 1–3 in the

1

previous section to connect the

antenna or cable to your VCR

 

 

and your TV.

 

Connect an S-Video Cable

2

between the S-VIDEO OUT jack

on the VCR and the [S-VIDEO]

 

 

jack on the TV.

3

Connect Audio Cables between

the AUDIO OUT jacks on the VCR

and the AV IN 1 [R-AUDIO-L] jacks on the TV.

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

English-

Image 5
Contents Audio Output Performance Comparison Rear Panel / Side Panel JacksSee Remote Control in the owner’s instructions for details Remote ControlHdmi in 1, 2, 3 or 4 jack Box What is HDMI?Connect a DVI to Hdmi Cable or DVI-HDMI Adapter betweenComponent in 1 or Connecting a CamcorderComponent Y, P B, P R jacks on Satellite receiver Set-Top BoxConnecting a VCR Connecting an Amplifier/DVD Home Theater Connecting a Digital Audio SystemUsing the D-Sub Cable Connecting a PCUsing the HDMI/DVI Cable Connect an HDMI/DVI cable betweenViewing the Menus Turning the TV On and OffTo Stop the Auto Program Function Selecting the antennasCustomizing the Picture Settings Setting the Channel ListPicture Mode Picture AdjustmentTo Select the Source Press the Source button on the Remote ControlPoor picture TroubleshootingProblem Possible Solution Contact Samsung Worldwide Service 55 Standish Court MississaugaContacte con Samsung Worldwide Samsung Electronics Canada Inc., Customer