Samsung LE32C570, LE46C579 Connecting to an Antenna, Plug & Play Initial Setup, VHF/UHF Antenna

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna.

VHF/UHF Antenna

Cable

or

Power Input

Plug & Play (Initial Setup)

ANT OUT

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Plug & Play is available only when the Input source is set to TV.

✎✎To return to the previous step, press the red button.

1	Selecting a language
2	Selecting Store Demo
	or Home Use
3	Selecting a country
4	Selecting an antenna
5	Selecting a channel
6	ModeSetting the Clock
7	Viewing the HD
	Connection Guide.
8	Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTERE button.

yy Select the Home Use mode. Store Demo Mode is for retail environments.

yy Return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD

volume is displayed, press and hold MENU for 5 sec. Press the ▲ or ▼ button, then press the ENTERE button.

Select the appropriate country. If the desired country does not exist on the menu, select Others.

✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

✎✎When you input the PIN number, 0-0-0-0 is not available. Press the ▲ or ▼ button, then press the ENTERE button. Select Air or Cable.

Press the ▲ or ▼ button, then press the ENTERE button.

Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Store. (P. 12)

✎✎Press the ENTERE button at any time to interrupt the memorisation process. Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto, then press the ENTERE button. The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function.

6 English