6H(HEADPHONE)
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the
■Using the sound function is restricted when connecting headphones to the TV.
■Prolonged use of headphones at a high volume may damage your hearing.
■You will not hear sound from the speakers when you connect headphones to the TV.
■The headphone volume and TV volume are adjusted separately.
7DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component such as a Home theatre receiver.
■When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control.
■5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
■When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such as a DVD /
8AUDIO OUT [R-AUDIO-L]
Connects to the audio input jacks on your Amplifier/Home theatre.
When an audio amplifier is connected to the AUDIO OUT
9EXT1, 2
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
■In EXT Mode, DTV Out supports MPEG SD Video and Audio only.
■Input/Output Specification
Connector |
| Input |
| Output | |
Video | Audio (L / R) | RGB | Video + Audio (L / R) | ||
| |||||
EXT 1 | O | O | O | Only TV or DTV output is available. | |
EXT 2 | O | O | X | Output you can choose. |
0AV IN [VIDEO] /
Video and audio inputs for external devices, such as a camcorder or VCR.
!USB
Connector for software upgrades and Media Play, etc.
@COMMON INTERFACE Slot
When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating that
the channel list is now updated.
■You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your
■hands since dropping the CI CARD may cause damage to it.
■Insert the
■The place of the COMMON INTERFACE Slot may be different depending on its model.
■CAM is not supported in some countries and regions, check with your authorized dealer.
13