English
Getting Started
Getting Started
Installing the Stand
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only.
1 | Attach your LCD TV to the stand. |
|
|
|
| ■ Two or more people should carry the TV. |
|
| |
| ■ Make sure to distinguish between the front and back of the stand when assembling |
| ||
| them. |
|
|
|
| ■ To make sure the TV is installed on the stand at a proper level, do not apply excess | Back | ||
| downward pressure to the upper left of right sides of the TV. |
| ||
2 |
|
|
| Front |
Fasten screws at position 1 and then fasten screws at position 2. |
|
| ||
| ■ Stand the product up and fasten the screws. If you fasten the screws with the LCD |
| ||
| TV placed down, it may lean to one side. |
| 2 | |
| ■ The stand is installed for models with the screen size of 37 inch and above. |
| ||
|
|
| ||
|
|
|
| 1 |
Disconnecting the Stand |
|
| ||
1 | Remove screws from the back of the TV. |
|
| |
2 | Separate the stand from the TV. |
|
|
|
| ■ Two or more people should carry the TV. |
|
| |
3 | Cover the bottom hole with the cover. |
|
|
|
| 1 | 2 | 3 |
|